Christmas time...
- Thread starter little possum
- Start date
Help Support Arborist Forum:
Boogieman142
ArboristSite Guru
cutforfun
Addicted to ArboristSite
Rep coming, thanks again and Merry Christmas
Husky 40
View attachment 268156
Husky 40 parts saw. Never had it running, was going to be a winter project that I never got around to doing.
Claimed.
View attachment 268156
Husky 40 parts saw. Never had it running, was going to be a winter project that I never got around to doing.
Claimed.
Last edited:
this is second bump. don't make me go to the remington thread to pass this on; if i do, it ain't gonna be free (just sayin). also, now that we've gotten further into the Christmas spending season blah, blah, blah i'm not gonna be able to spring for shipping. again, just sayin. merry Christmas to all you saw nerds.
okay, guess i've gotta repost the photos.
please see previous post for text.
got a poulan 2000 frankinsaw (sort of) that i rescued and have spent as much time on it as i'm gonna. it fires up but doesn't want to be tuned. i'm figuring needs seals but won't swear to that. powerhead only. pix tomorrow.
diggers_dad
Sawchologist
got a poulan 2000 frankinsaw (sort of) that i rescued and have spent as much time on it as i'm gonna. it fires up but doesn't want to be tuned. iirc i rebuilt the carb and replaced fuel lines/filter. i'm figuring needs seals but won't swear to that. powerhead only. pix tomorrow.
okay so its not tomorrow. i stumbled across these pix so here they are. disregard the 306A; just act like its not there.
okay so its not tomorrow. i stumbled across these pix so here they are. disregard the 306A; just act like its not there.
Warped5
WingNut
Time for our next Mystery Gift ...
... number 3 and we're not screwing around!
Yes folks, the first one to PM me with their shipping address gets it!
Merry Christmas!
... number 3 and we're not screwing around!
Yes folks, the first one to PM me with their shipping address gets it!
Merry Christmas!
sefh3
Addicted to ArboristSite
I'll bite on this. PM sent.
cat-face timber
Knot Bumper
Warped5
WingNut
MG #3 winner is ................................................................... Cowroy!
He's gonna be SO thrilled and appreciative that I'm sure he'll send me that 166, right? :hmm3grin2orange:
cowroy
Addicted to ArboristSite
54stude
ArboristSite Operative
Next item, one Stihl flywheel puller i made, fits newer saws like 066 with m22x1.5 thread.
Stihl flywheel puller Photos by 54stude | Photobucket
If you want to make your own, the part was made from a wheel stud from a kenworth shop, and the inner part is tapped 3/8" with a clearance hole for the stud that is 1/2".
This is claimed by pm.
Stihl flywheel puller Photos by 54stude | Photobucket
If you want to make your own, the part was made from a wheel stud from a kenworth shop, and the inner part is tapped 3/8" with a clearance hole for the stud that is 1/2".
This is claimed by pm.
Last edited:
diggers_dad
Sawchologist
Good morning gents! I sent out 6 boxes yesterday through USPS. If you were expecting something from me you should have a PM with a tracking number. Even better, Santa pitched in for some help on the shipping and I have been able to cover all the postage so far.
Now, I should be able to put another one of these together if anyone would like one. As I mentioned earlier, there isn't anything super special here, just some little things that make saw work go a bit easier. Some aluminum plate and inner tube for sealing and checking vacuum, droppers for putting fuel in tight spots, storage containers for small parts and a scrench or two. Send me a PM and I'll try to get it in the mail this week.
Merry Christmas!!
dd
6:15 - that went fast. I'll try to get another one together later. This one is headed to Illinois.
Now, I should be able to put another one of these together if anyone would like one. As I mentioned earlier, there isn't anything super special here, just some little things that make saw work go a bit easier. Some aluminum plate and inner tube for sealing and checking vacuum, droppers for putting fuel in tight spots, storage containers for small parts and a scrench or two. Send me a PM and I'll try to get it in the mail this week.
Merry Christmas!!
dd
6:15 - that went fast. I'll try to get another one together later. This one is headed to Illinois.
Last edited:
Warped5
WingNut
Mg #4 .........
.. will remain a mystery as the first three were.
But I'm just gonna send it off to Mastermind. Even the weapon-waving ape in the room deserves something, right?
Thanks for starting the thread this year, Lil' Possum!
I'd like to wish everyone a very happy & safe holiday season!
Cheers!
.. will remain a mystery as the first three were.
But I'm just gonna send it off to Mastermind. Even the weapon-waving ape in the room deserves something, right?
Thanks for starting the thread this year, Lil' Possum!
I'd like to wish everyone a very happy & safe holiday season!
Cheers!
MechanicMatt
Cut Split Stack Burn
Couple mini mac bars off to 5th ave, Merry Christmas OverTrained.
diggers_dad
Sawchologist
Last and best...
This is the last one of these I can put together, but I've saved the best stuff for the last box. Sort of a "beginner's special" for saw nuts. I can fill a box with a couple of aluminum plates for making intake / exhaust covers with inner tube to complete the seal, three sections of Tygon fuel line in different sizes, 2 screnches (one with Stihl style nuts and the other with standard), several plastic containers with lids for small parts storage, a pair of hemostats, 2 tubes of super glue, some droppers for putting fuel mix right into the carb where you want it, and....
Some "e-clips" in assorted sizes (those little things always get away from me during the tear-down), some plastic caps for closing off impulse lines or other fuel lines to keep the dirt out, and an insert that screws into the spark plug hole with a barb connection for testing vacuum.
First PM can have all this shipped to his/her door, possibly arriving before Christmas.
Merry Christmas,
dd
This one also went fast. Only took 9 minutes for it to get scooped up...
This is the last one of these I can put together, but I've saved the best stuff for the last box. Sort of a "beginner's special" for saw nuts. I can fill a box with a couple of aluminum plates for making intake / exhaust covers with inner tube to complete the seal, three sections of Tygon fuel line in different sizes, 2 screnches (one with Stihl style nuts and the other with standard), several plastic containers with lids for small parts storage, a pair of hemostats, 2 tubes of super glue, some droppers for putting fuel mix right into the carb where you want it, and....
Some "e-clips" in assorted sizes (those little things always get away from me during the tear-down), some plastic caps for closing off impulse lines or other fuel lines to keep the dirt out, and an insert that screws into the spark plug hole with a barb connection for testing vacuum.
First PM can have all this shipped to his/her door, possibly arriving before Christmas.
Merry Christmas,
dd
This one also went fast. Only took 9 minutes for it to get scooped up...
Last edited:
