cunningtonwood
New Member
hey guys i am new to these fourms, I am 20 years old from Huntsville, Ontario, Canada i recently just bought a Cord King Firewood processor with a 60'' circular blade, the machine is approximatly 12 years old, it was comeplety rebuilt in 2007. so i say to all of you guys looking to buy a Cord King to buy a USED one, no need to buy a brand new one and spend over $60,000 extra when parts dont even come close to 15,000 to rebuilt or put new parts on it. the machine its self is very very great it has a 12 way fixed wedge on it and it DOES have quite a bit of debris altho i have a seperator on the converyor so it does help 75%, you will need the small conveyor to go under the splitter as it does built up fast after about 5 facecords its full of debris under it. the machine is excellent on fuel running it at 3200rpm. i put new teeth on it for around $500 and the guy says it should last me a full year of steady cutting. The machine is quick and fast and the ONLY DOWNFALL with this machine is you need to have a skid steer or loader at all times and if your going to be heavy cutting you'll need a full time guy in the skid steer or loader and sometimes the logs to get stuck in the indeed trough and sometimes also it puts 2 logs in at once so make sure you have a chain so to sum it up if your going to be doing a firewood business you need to have a machine with a circular saw even if it is homebuilt, messing around with chains and always sharpening them just is to much time and messing around :msp_tongue:
View attachment 266328View attachment 266329
View attachment 266328View attachment 266329