Dolmar ca

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

timbo917

ArboristSite Lurker
Joined
Nov 23, 2022
Messages
17
Reaction score
2
Location
Belgium
Anybody know what the max rpm of a dolmar ca should be? I have a ca that feels like it is not reaching a high enough max rpm. I rebuild the carburetor and the saw is running good and reacts on adjustments made to the mixture screws but it feels like the max rpm is a little low. Can’t get it up wit the H screw. I fitted a capacitor upgrade with the info I found here on the forum. I did use an other high voltage capacitor than mentioned on the forum because I could not find the exact same one over here. Could it be an ignition timing issue? To late? Anny thoughts are appreciated
 
Some more info. I totally rebuild the crankcase with new bearings,shaft seals and gaskets
 
Ok,I missed that. Thanks for the info. 7000 rpm max,that’s not that much. Could be that it does reach max rpm then. I think I have to invest in a tachometer
 

Latest posts

Back
Top