The slope wasn't too bad, but scary as hell with loose rock everywhere and a house and vehicles below us. Like walking through a damn minefield. Those rocks absolutely screamed down the hill if you turned one loose.
Falling pics 11/25/09
- Thread starter Burvol
- Start date
Help Support Arborist Forum:
The slope wasn't too bad, but scary as hell with loose rock everywhere and a house and vehicles below us. Like walking through a damn minefield. Those rocks absolutely screamed down the hill if you turned one loose.
bitzer
******** Timber Expert
I agree. Its gettin old here too. I was in a summer snow out your way one time when I was younger. Glacier national park in August. About a foot of snow fell that day. We boogied before they closed some of the roads out of the park.
We had 80 some degrees a week before last Sunday and now this BS again. Hey at least you've got the panaoramic views though!
RandyMac
Stiff Member
Was like that in parts of the Sierras, lots of rocks and signs of civilization. People build in the dammest places and have trees logged, either as an afterthought after building or a newer owner of an older place.
It's still like that.
I was probably up harassing loggers somewhere.
RandyMac
Stiff Member
I played at logging one whole season taking out timber around cabins, campgrounds and such. If you discounted power/water/phone lines, Aunt Mable's favorite Cedar and structures, it was easy money.
OregonSawyer
ArboristSite Operative
x2!
I love the pics! Keep them coming!
Better yet - if you get around to it - post up one of the videos
Last edited:
forestryworks
Addicted to ArboristSite
Using the new DCS, Inc. wrap handle. I dig it! Thanks, Nate!
This is one of the last hazard trees I am cutting at this state park for my volunteer job. Should finish the rest of them this week.
More time for the part-time timber falling job I hope.
Edit: A few things I like about this handle. It didn't take me long to get used to the different geometry it has than what is found on a 3/4 wrap. At first, I thought a smaller diameter handle might be a negative, but it's not at all. I really like the "pickup bed" grip stuff.
One of my complaints with the USA handlebars is the cheap rubber hose that it used on it - doesn't take much of a beating if you have to make low stumps. I had mine all wrapped up in electrical tape. The DCS handlebars should take a beating pretty well.
I really like the corners of the handlebar on both the clutch and flywheel sides. Great for the humboldt and the conventional undercuts. On the backcuts the transition is nice when flipping the saw from the undercut to dogging in and sweeping.
Overall a great handlebar. I'd be interested in what others have to say about it, and how they think it compares to other handlebars of the same full wrap style.
<iframe title="YouTube video player" width="640" height="390" src="http://www.youtube.com/embed/5u1k7IYVuFI" frameborder="0" allowfullscreen></iframe>
This is one of the last hazard trees I am cutting at this state park for my volunteer job. Should finish the rest of them this week.
More time for the part-time timber falling job I hope.
Edit: A few things I like about this handle. It didn't take me long to get used to the different geometry it has than what is found on a 3/4 wrap. At first, I thought a smaller diameter handle might be a negative, but it's not at all. I really like the "pickup bed" grip stuff.
One of my complaints with the USA handlebars is the cheap rubber hose that it used on it - doesn't take much of a beating if you have to make low stumps. I had mine all wrapped up in electrical tape. The DCS handlebars should take a beating pretty well.
I really like the corners of the handlebar on both the clutch and flywheel sides. Great for the humboldt and the conventional undercuts. On the backcuts the transition is nice when flipping the saw from the undercut to dogging in and sweeping.
Overall a great handlebar. I'd be interested in what others have to say about it, and how they think it compares to other handlebars of the same full wrap style.
<iframe title="YouTube video player" width="640" height="390" src="http://www.youtube.com/embed/5u1k7IYVuFI" frameborder="0" allowfullscreen></iframe>
Last edited:
2yb3
ArboristSite Operative
just beautiful wood, howd you fall it,, as for all the haters calling photoshop, theyre just jealous cause they got tiny wood lol
Slick handlebar Jameson, and Nate. I gotta pay Nate a visit one of these days.
Nate, if you're out there, I'll be back on Swan Lake one of these days this Spring.......You'll have to come visit camp for an evening - Sam
Nate, if you're out there, I'll be back on Swan Lake one of these days this Spring.......You'll have to come visit camp for an evening - Sam
hammerlogging
Addicted to ArboristSite
Hollywood!
Metals406
Granfodder Runningsaw
I'll give you a ring when we head North.
One of the guys I work for bought a new mini logging machine. We tried it out today.
View attachment 181639
View attachment 181641
Worked pretty nice, made brushwork easy, put a truck load in the road.
Couple pics of cutting pard Aaron.
View attachment 181642
View attachment 181644
These trees had some serious hardware in the first eight feet...had to get a little creative.
View attachment 181643
One of the guys I work for bought a new mini logging machine. We tried it out today.
View attachment 181639
View attachment 181641
Worked pretty nice, made brushwork easy, put a truck load in the road.
Couple pics of cutting pard Aaron.
View attachment 181642
View attachment 181644
These trees had some serious hardware in the first eight feet...had to get a little creative.
View attachment 181643
Last edited:
One more, nobody would take a pic of me...had to take one of my saw though. Axed the bark off this tree to try and get around some serious iron. Didn't avoid the vertical barb wire about four inches from the pith. Not sure how the #### that ends up like that in a tree, but chain does not agree with it - Sam
View attachment 181648
View attachment 181648
That sure looks like an ugly place. Iron fences, junk, glass... I just found an iron rake stashed inside an ash. I bet they've been looking for that rake for some time. Some of these days I'm going to buy me a metal detector. If I get cured, financially.
Metals406
Granfodder Runningsaw
Cool pics Sam! Man you boys are cut'n Pondy a lot down there.
nw axe man
ArboristSite Operative
Here's one I did a few years ago. Some knucklehead finally came to his better judgement and stopped before he got himself into some serious trouble. He started the backcut but chickened out. I bought the tree for firewood. As Forestryworks says, no time for sissy axes here.
Metals406
Granfodder Runningsaw
I ain't never seen a Ford springboard before! :hmm3grin2orange:
nw axe man
ArboristSite Operative
Gotta have feet wide like a duck long like a ski to wrap over the bed rails. The tough part about having a mobile spring board is coordinating with the operator of the springboard. You can get dumped pretty quick.
