Falling pics 11/25/09

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
IMG_2017.JPG IMG_2018.JPG IMG_2020.JPG
So I cut a hole, a couple smaller ash got hung up. I couldn't go any further as the conifers is the back ground are 20' past the property line.
As you know trees on the edge of the bush lean outwards, so I couldn't drop anymore,
What I did fall, allowed the crown to hit the ground.
I can't explain why I wasn't cutting the small ash out of the way to start with.
 
I had to drop a nice ash from my yard today. Top was split and could land on my neighbors new garage so it had to go.
38f309641e3ee0796872b29eaec187e3.jpg
b178b55c9cccfb286b18399650df710d.jpg
 
No, but I've stood on a skidder blade a couple of times when I didn't want to mess around making a spring board.
Done that a time or two same with standing on the back of the shovel and the D7 winch arch nothing I've cared for.

Sent from my Pixel XL using Tapatalk
 
Have you had the joy of standing on a fence to cut one?

Sent from my Pixel XL using Tapatalk

Box of a Ferd ranger, and still cutting over my head...

Skidder tires, skidder roof, the roof was probably the worst, narrow, slippery, crooked, 9' in the air.

Most of the fence trees I'll try and back bore, or whatever to cut them low, that one had a 2x4 nailed to the back side of it, and I didn't feel like putting yet another fresh chain on...

Spring boards in comparison are far more comfortable, especially with caulks on.
 
Not falling trees, but for trimming fence rows my grandfather had a grid of metal strips welded on the inside roofs of his 1950’s Dodge farm trucks to somewhat keep them from collapsing. Men stood on top and used bow equipped Homelites and MACs.

Ron
 
It's pretty.

But does it cut?
Did some cutting with it this afternoon man the wood flies out of vs the Fabtek which is good in clear cuts where you don't have to worry about leave trees but you can manually feed. Only concern might be the head size but only time will tell as well as talking with the instructor that came out for the weekend to get me going.

Sent from my Pixel XL using Tapatalk
 
That trouble hinge, is a whole lot easier to pull off, if you call it a siswheel and put it in a humboldt.

Then your not boring into a saw log...

just sayin....

... .

Is this one of those wheel things you speak of?

IMG_2889.JPG

Just bored on a rainy day. Only dropped one tree - another nice for firewood red oak. Tried to help out at the lot and buck a little but broke my chain early in so just called it a day. Ron
 
@woodfarmer
Awesome to hear progress in your felling. Making a hole for a tree is a great step in the right direction. The job ends up looking better because it shows you thought about how your timber will fall. Not just bull and jam.
On your ash cutting. That thick hinge is gonna bite you at some point. Ash is def the most explosive wood I work with regularly. Gut the hinge and nip the sapwood off the sides in my experience.
Be safe bro
 
IMG_2036.JPG IMG_2037.JPG IMG_2038.JPG Thanks Chep.
Ash is not what I normally work with, so there has been a lot of trials.
I was able to do a siswheel on this tree (I think)it was leaning to the spruce tree on the left and I managed to pull it around. I put a piece of the face cut wedge in the opposite corner.
So my day was 3 trees felled, skid 10-10' -12' logs. 2-16' firewood logs and one whole tree top. Not a bad day for me.
 

Latest posts

Back
Top