Want to Buy Homelite Mp-88 part

[BigEJynker]

Looking for a discontinued homelite part. Part# A03881 cylinder and piston for a Homelite mp88 demo/ concrete saw

 

[Guido Salvage]

Let me know what you find, I have both a MP-88 and an 8800 torn apart in boxes and in need of P & C's.

 

[BigEJynker]

Let me know what you find, I have both a MP-88 and an 8800 torn apart in boxes and in need of P & C's.

View attachment 476791

Don't know if this will help but i noticed on Ebay someone listed Rings.for mp88 . If your like me thats no help.but if i find c&p I'll let you know .

 

[Jacob J.]

Let me know what you find, I have both a MP-88 and an 8800 torn apart in boxes and in need of P & C's.

Gary- are your top ends not salvageable or are the cylinders just missing? I got lucky and got a good top end for my saw (mine was completely missing) from Duke Thieroff, so you might try him.

 

[Guido Salvage]

Gary- are your top ends not salvageable or are the cylinders just missing? I got lucky and got a good top end for my saw (mine was completely missing) from Duke Thieroff, so you might try him.

I have not looked at either in a while, but my memory is that the MP-88 injected a lot of dust and the piston and cylinder are toast. The 8800 might get by with a piston. Both have been a low priority as I have a number of runners but I will check with him.