Huskee/Speeco Hyd Oil Filter number?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
kgreer

kgreer

ArboristSite Operative
Joined
Oct 15, 2008
Messages
117
Location
colorado
Kevin, will the filters you listed work for the 35 ton model as well?

I'm trying to help my brother in-law find a filter and parts, he doesn't use the internet. Can you tell me where the model number is located on the splitter? The 35 ton pdf's online show the engine on the wrong side. On his model, if the splitter were connected to a vehicle, the 12.5hp motor is on the passenger side.

Thanks for any info you can provide.
Jerry

Yes, this works on all of our models.
 
Dr. Hackemoff

Dr. Hackemoff

ArboristSite Operative
Joined
Oct 28, 2003
Messages
176
Location
SW Minnesota, God's Country
Changed the filter on my 34 ton Speeco last night with a WIX 51553. I cleaned the fill plug and wrapped black tape around the breather hole. Staged the bucket and new filter, removed the old one, wiped the oil off my hands, and installed the new one. Probably 10-15 seconds of time. I only lost a pint of oil at most. If I had a helper handy to spin the new one on, I wouldn't have lost more than a cup.

Is this about what everyone else is seeing for fluid loss?
 
Erik B

Erik B

ArboristSite Guru
Joined
Mar 23, 2010
Messages
961
Location
Western Wisconsin
I was told by one of the small engine mechanics at Farm and Fleet to tip the splitter towards the foot and you would have very little oil spilled. I tried it and the only oil I had to deal with was the oil in the filter.
This is my first time trying to post a picture. Wish me luck.
 

Latest posts

Top