AxeKnot
ArboristSite Guru
- Joined
- Jun 23, 2007
- Messages
- 741
- Reaction score
- 42
Could any of you good people give an honest review of this saw as I'm thinking of buying one with a 15 inch bar and a 24 inch bar.
Thank you!
Thank you!
I see you have a 372XP. Think of the 365 of that, with less power. (which is what it is)
Go for it. I upgraded mine to a 372, but it is a well built, well respected saw.
I like the way it feels, although I do wish the suspension was a bit stiffer.
Mark
Thanks Oldsaw and tap, is it decent with 24inch bar?
Thanks Oldsaw and tap, is it decent with 24inch bar?
There is a stiffer suspension for the 372, must fit your 365 hybrid as well !?
Just got the 372 IPL, they aren't listed as options on the 365.
Mark
Simply drill three 8mm holes in the muffler
I've only run mine after the upgrade.
Mark
Does the 288 have alot of hours? Maybe you could re-ring it. Check compression, if it's low throw in a set of rings, put a couple of holes in the muffler and retune the carb. That should put some zip back into it.
How do you upgrade the 365 oldsaw?
Enter your email address to join: