Landmark
Chainsaw Enthusiast
Got a 371 that I recently been working on and cannot get it fixed. It cuts off in the cut or when tilted slightly backwards. I ckd the fuel/impulse lines and cleaned the carb. reassembled and same problem. Switched coil and same problem. You can be giving it throttle and it just turns off when tilted back. Then you can fire it back
up and it runs great until you tilt it again or cut with it. I tried cutting with it tilted forward and it does fine. Anybody who has had this issue chime in and let me know what you found or what to look for.
up and it runs great until you tilt it again or cut with it. I tried cutting with it tilted forward and it does fine. Anybody who has had this issue chime in and let me know what you found or what to look for.