Bforeman
ArboristSite Lurker
Hello all new to the forum A friend of mine gave me a 394 Xp in need of top end rebuild oem cyl is salvageable any piston recommendations TIA
Brian
Brian
Husky 394 xp
- Thread starter Bforeman
- Start date
Help Support Arborist Forum:
You can use a 395xp piston in it.
Bforeman
ArboristSite Lurker
Not to be rude I was asking brand specific.
Think I’ll go with the HyWay pop up lil more compression as I will perform vacuum,pressure test tomorrow afternoon Thanks & have a Merry Christmas
Think I’ll go with the HyWay pop up lil more compression as I will perform vacuum,pressure test tomorrow afternoon Thanks & have a Merry Christmas
Brand?
OEM
(Husqvarna Part Number 537137671)
OEM
(Husqvarna Part Number 537137671)
Bforeman
ArboristSite Lurker
husqvarna 394 xp
Lol
I think JQ is suggesting you stick with an OEM piston.
Next best thing would probably be a Meteor.
Depending on current squish & your intended end use (ie if you were planning on milling with it) a pop-up may not be the best solution
Next best thing would probably be a Meteor.
Depending on current squish & your intended end use (ie if you were planning on milling with it) a pop-up may not be the best solution
Bforeman
ArboristSite Lurker
Pretty much gonna seldomly be used as I had the meteor on my mind I have a ms 170 ,271 & husky 350 in the stable ready to cut. Thanks for the support & have a Merry Christmas
- Joined
- May 13, 2014
- Messages
- 710
- Reaction score
- 675
OEM or maybe Meteor with caber rings.
Would not consider any brands after that for a saw of such caliber.
Would not consider any brands after that for a saw of such caliber.
I just stuck a Dukes, website Sawsalvage moly coated piston in a 394 for local. Doing great so far.
Dont let the price fool ya. https://www.sawsalvage.co/products/the-dukes-performance-coated-piston-fits-husqvarna-394xp-56mm
Also put one in a 395 now too.
Meteor quality been going down and heard they are sourcing hyway for pistons now too. No clue if true but we did a thread and guys saying they are looking like hyway pistons side by side now.
Dont let the price fool ya. https://www.sawsalvage.co/products/the-dukes-performance-coated-piston-fits-husqvarna-394xp-56mm
Also put one in a 395 now too.
Meteor quality been going down and heard they are sourcing hyway for pistons now too. No clue if true but we did a thread and guys saying they are looking like hyway pistons side by side now.
I will chime in about Meteor pistons. I bought 2 of the same and the weight was a little more than one gram difference. They were for the 262xp. One from Baileys, one from Wolf. 64.1 grams vs 65.2 grams. My nickles from 1964 and 1997 both weighed 5.0 grams of my scale. Same box and label. Just an observation. I have always tried for OEM parts. Even the spark plug.
Dennisthemenace
ArboristSite Operative
A nice 394 should have nothing but oem
