husky kicks

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
It's as good as it gets

From what I have had my hands on I will agree that the 372 is better "out-of-the-box" than the 044/440!!!
However..............
I have run a few 044's that were better than other 044/440's..............pretty close to a 372 if memory serves!!!

LOL, no dodge or fords here, only Chevys. If someone were to send me a slow poke 372, I would run them with the same chain and try to keep it close to the same conditions. I would like to see a non bias redneck race:clap: I'll leave the bottle in da house:)

Hey 2000s&m,
Take rahtreelimbs word for it.
Unless you want a good arse wooping, Come on up here with your 440
my 2171 will spank you.:biggrinbounce2:
 
Yea if you seen your cheerleaders in my Garage it would have been on the Dart board spinning. LOL
I thought you owned all types of saws, Don't tell me that piped Jonsered saw is not yours. Hmmmm



Keep spinning the wheel Manual.........That Jred is a zebra.......Seems you must be a Stihl cheerleader because you own a Stihl and it took a 029 to pay for the Jred.........:hmm3grin2orange:

Seems that 029 was your bread and butter for awhile.....:hmm3grin2orange:


Spin ,Spin ,Spin......:ices_rofl: :ices_rofl: :ices_rofl: :ices_rofl: .



.
 
Last edited:
Hey 2000s&m,
Take rahtreelimbs word for it.
Unless you want a good arse wooping, Come on up here with your 440
my 2171 will spank you.:biggrinbounce2:

Get back under the bridge with Troll. A 372 "might" run with my 440 but a Johnny won't stand a chance:dizzy:
 
Keep spinning the wheel Manual.........That Jred is a zebra.......Seems you must be a Stihl cheerleader because you own a Stihl and it took a 029 to pay for the Jred.........:hmm3grin2orange:

Seems that 029 was your bread and butter for awhile.....:hmm3grin2orange:


Spin ,Spin ,Spin......:ices_rofl: :ices_rofl: :ices_rofl: :ices_rofl: .



.


He is a closet Stihl lover:hmm3grin2orange:
 
Keep spinning the wheel Manual.........That Jred is a zebra.......Seems you must be a Stihl cheerleader because you own a Stihl and it took a 029 to pay for the Jred.........:hmm3grin2orange:

Seems that 029 was your bread and butter for awhile.....:hmm3grin2orange:


Spin ,Spin ,Spin......:ices_rofl: :ices_rofl: :ices_rofl: :ices_rofl: .



.

Sounded like you may call it the "first" 2147 in the US (except for the label), the way you once described it........:biggrinbounce2:
 
Keep spinning the wheel Manual.........That Jred is a zebra.......Seems you must be a Stihl cheerleader because you own a Stihl and it took a 029 to pay for the Jred.........:hmm3grin2orange:

Seems that 029 was your bread and butter for awhile.....:hmm3grin2orange:


Spin ,Spin ,Spin......:ices_rofl: :ices_rofl: :ices_rofl: :ices_rofl: .



.


HAHAHAHAHAHAHAHA!!!!!:laugh: :laugh:

Gary
 
Last edited:
Pony up :D. The 1st week of August there is going to be chainsaw racing in northern Ohio. This is going to be run and timed by unbiased individual that holds the same saw and crosscut racing every year.
It has to be (stock gas) saws can be woods ported and run what you bring, 5 classes of saws. So bring your 372's and 440's 044's and run them. It will be Hot start saw idling on the ground, both hands on the wood at the word go, get saw and make 3 complete cookies in 10"x10" square cant. There will be 181, 460's 7900's in that class also. 7900's took top 5 spots last year. But got the feeling a couple good running (2) 460's will move in on that this year.
I know of 880, 2-084, 066, 2100, 2-460, 181, 7900, maybe a BB372 dont know for sure yet, up to 3 361's, 357, 5000, 346 and there is even a very small class for 40cc and under, we are going have to did something up for that class for fun. :D
 
Last edited:
Keep spinning the wheel Manual.........That Jred is a zebra.......Seems you must be a Stihl cheerleader because you own a Stihl and it took a 029 to pay for the Jred.........:hmm3grin2orange:
Seems that 029 was your bread and butter for awhile.....:hmm3grin2orange:
Spin ,Spin ,Spin......:ices_rofl: :ices_rofl: :ices_rofl: :ices_rofl: .
.

Nope you got it all wrong. (Again)
I traded my 029 super for a used Ms361, Which is making me money now. My Jonsered I paid cash for.

Now as "Most" of us know The ms361 was the closest saw to a Husky that Stihl is Making, Now it's the ms441.

WAY TO GO STIHL keeeeeep Evolving. Rah, Rah, Rah...
attachment.php
 
Last edited:
Nope you got it all wrong. (Again)
I traded my 029 super for a used Ms361, Which is making me money now
along with my Jonsered I paid cash for.

Now as "Most" of us know The ms361 was the closest saw to a Husky that Stihl is Making, Now it's the ms441.

WAY TO GO STIHL keeeeeep Evolving. Rah, Rah, Rah...
attachment.php

361/357, 361 better saw, 441/575, 441 better saw, how do I know , cause I SAID SO,:ices_rofl: :ices_rofl: :ices_rofl:
 
Pony up :D. The 1st week of August there is going to be chainsaw racing in northern Ohio. This is going to be run and timed by unbiased individual that holds the same saw and crosscut racing every year.
It has to be (stock gas) saws can be woods ported and run what you bring, 5 classes of saws. So bring your 372's and 440's 044's and run them. It will be Hot start saw idling on the ground, hand on the wood at the word go, get saw and make 3 complete cookies in 10"x10" square cant. There will be 181, 460's 7900's in that class also. 7900's took top 5 spots last year. But got the feeling a couple good running (2) 460's will move in on that this year.
I know of 880, 2-084, 066, 2100, 2-460, 181, 7900, maybe a BB372 dont know for sure yet, up to 3 361's, 357, 5000, 346 and there is even a very small class for 40cc and under, we are going have to did something up for that class for fun. :D

Sounds like fun! I, however can't come to Ohio just for this reason.....:chainsaw:
 
Pony up :D. The 1st week of August there is going to be chainsaw racing in northern Ohio. This is going to be run and timed by unbiased individual that holds the same saw and crosscut racing every year.
It has to be (stock gas) saws can be woods ported and run what you bring, 5 classes of saws. So bring your 372's and 440's 044's and run them. It will be Hot start saw idling on the ground, hand on the wood at the word go, get saw and make 3 complete cookies in 10"x10" square cant. There will be 181, 460's 7900's in that class also. 7900's took top 5 spots last year. But got the feeling a couple good running (2) 460's will move in on that this year.
I know of 880, 2-084, 066, 2100, 2-460, 181, 7900, maybe a BB372 dont know for sure yet, up to 3 361's, 357, 5000, 346 and there is even a very small class for 40cc and under, we are going have to did something up for that class for fun. :D

Me and Andy (Redprospector) will be up in South Fork Colorado on July 21/22 for their competition. Reds BAAAAADAZZZ Ported 7900 WILL dominate the 5 inch class yet again, unless he forgets to turn his switch on again. I will have to run my 254XP or my pre-historic Mac since I still don't have a descent 5 cuber (I have been to busy with the bikes). I also doubt anything will beat his 3120, I will be sure to rub it in around here.
 
Get back under the bridge with Troll. A 372 "might" run with my 440 but a Johnny won't stand a chance:dizzy:

What? Ask any Michigander that lives in the U.P.
They will tell ya, "I'm a Troll cause I live Under da Bridge" No Biggie to me.

You got a lot to learn about the 2171 and the 372..:buttkick:
Go do a search, before you make a comment like that.:newbie:
 
What? Ask any Michigander that lives in the U.P.
They will tell ya, "I'm a Troll cause I live Under da Bridge" No Biggie to me.

You got a lot to learn about the 2171 and the 372..:buttkick:
Go do a search, before you make a comment like that.:newbie:

I know it(2171) is a 372 with different plastic, dummy! Is that what you are mad about??? Just get a 440 and quit crying:cry: :cry:
If I had one doubt in my mind that a 372 will stomp a 440 I would call off all this fun. As you see, I don't:)
 
GTG cut times for 80cc under class. Here is 3 local gtg times I have on hand with times. Also have a 4th one, but didnt have saw types listed just times for my info. Enjoy comparing your saws.

80cc under
10" round poplar 2 cuts hotstart over wood
Gas saws 07

WJN7900 6.87
EHP7900 7.62
460 8.82
460 9.75

0-80cc 2006
Gas saws 10"x10" 2 cuts hotstart over wood

DC372 3.11
WJ372 3.31
WJN7900 4.13
GL044 5.12
046 6.06
FS365/372 7.53
048 13.29

0-80cc 10"x10" square cant very firm poplar
Gas saws

PP372 4.46
PP2171 4.62
N7900 4.80
Bone stock 7900 with 7T 5.56
046 5.81
 
Last edited:

Latest posts

Back
Top