Want to Sell Husqvarna, Jonsered, Sachs Dolmar, Stihl many NOS, NLA, and USED parts

[Roadhunter1]

Any Stihl 1128 or 1125 series parts? Pm me if you do please

 

[LogSawyer74]

I'm down for an oem set of Stihl MS360 covers (orange cylinder and air filter cover) if you got them. Got all the parts for a really nice build except these covers. thanks

 

[LogSawyer74]

The more I look thru your pics, the more I'm amazed! How did you get all this stuff? Is this just the result of years of hoarding? I watch ebay and marketplace pretty often for good bargains. I've got a modest collection of Stihl 361 parts, but mine pales in comparison to yours. Quite the stash you've got there...

 

[Jesse Bullock]

Hi all, i’ve bought a few chainsaws off of arbor site now, but i am yet to sell anything through this forum! Figured it was time to share and pass on a few items! I’m mainly looking to trade for some nice saws, or NOS saws that i haven’t been able to find. I’d really like to find a jonsered cs2153, jonsered cs2063, jonsered cs2139t, husqvarna 346xp oe special edition clear plastics(any of the clear plastic models) Stihl 088magnum, and sachs dolmar 153,166. All listed below are nos. husqvarna 2101xp oem cylinder and piston kit, 2100 NOS OEM Cylinder, NOS SEM coil for 2100 and more, Husqvarna OEM 2100 air filters,Jonsered 2094/2095 top cover with air filter cover and air filter, pioneer s6000 full wrap handle, Jonsered 2083 West Coast full wrap handle, Jonsered 2077,2083 OEM Piston kit, John Deere 550cs/Homelite 8800 OEM muffler kit, Stihl 050, 051 AV crankcases (1111-020-2100) Stihl 028av crankcase, stihl 038 av Crankcase, stihl 056av Crankcase, 044 crankcase. Stihl clutch covers many models, Dolmar 144 starter cover and a room full of other NOS PARTS as well. Not looking to sell as a lot, but more willing to wheel and deal with a New or NOS Saw.Open to fair offers Located in central, Pa. PP GOODS AND SERVICE. shipping to lower 48 Will update photos this evening

How much for the homelite bars?

 

[T_Fishaa]

The more I look thru your pics, the more I'm amazed! How did you get all this stuff? Is this just the result of years of hoarding? I watch ebay and marketplace pretty often for good bargains. I've got a modest collection of Stihl 361 parts, but mine pales in comparison to yours. Quite the stash you've got there...

would you believe me if i told you i have been collecting for a little over a year now? this doesn’t include all the pieces in between or my chainsaw collection itself as well as a shed STUFFFED with used parts. I appreciate your interest and i guess i just found the right guy at the right time for a couple buye

 

[farmer steve]

would you believe me if i told you i have been collecting for a little over a year now? this doesn’t include all the pieces in between or my chainsaw collection itself as well as a shed STUFFFED with used parts. I appreciate your interest and i guess i just found the right guy at the right time for a couple buye

I don't need anything (at the moment) I see your in central PA. York Co here. Now I know what happened to parts I was always looking at but they were always sold.

 

[T_Fishaa]

I'm down for an oem set of Stihl MS360 covers (orange cylinder and air filter cover) if you got them. Got all the parts for a really nice build except these covers. thanks

no 360 covers unfortunately but i do have a decent crankcase with scored cylinder and piston on it and a real nice tank handle except it
leaked fuel out a seam!

 

[T_Fishaa]

I don't need anything (at the moment) I see your in central PA. York Co here. Now I know what happened to parts I was always looking at but they were always sold.

haha i wish that was true! i bought almost all my stuff from 3 different people. I didn’t even get to my nos homelite parts yet not sure if i will just the amount of them i have. 1 hour directly North of york is where i reside. was really hoping to find somebody local that wanted to do some trading

 

[Woodslasher]

Long shot, but is there a J-red 2171 full wrap in there?

 

[sean donato]

Where abouts 1 hour north of York? I'm in Lebanon near the Lancaster line. Colebrook or Mt Wilson if your familiar with the area. Always nice to have an idea where a fellow member is coming from.

 

[av8or3]

He’s got some nice parts for sure. Hoping to score some.

 

[T_Fishaa]

Where abouts 1 hour north of York? I'm in Lebanon near the Lancaster line. Colebrook or Mt Wilson if your familiar with the area. Always nice to have an idea where a fellow member is coming from.

Middleburg, Pa is where i live! i knew there had to be some local guys on here

 

[farmer steve]

Middleburg, Pa is where i live! i knew there had to be some local guys on here

Frequented some of the "drinking establishments" in Middleburg when I lived in Perry County back in the 80's. Any NOS 056 Mag 2 stuff?

 

[T_Fishaa]

that nos case is for an 045,056 av. i have used crankcases, cylinders, top handles, carb boxes, tons of carbs, couple nos starter covers

 

[ErnieG]

What are the full wrap handles for in the pic ?
Ernie

 

[T_Fishaa]

Got any 2100 fuel hose grommets?

part number on the grommet? a part number on the piston would be alright to! Thanks

 

[T_Fishaa]

Long shot, but is there a J-red 2171 full wrap in there?

I do not believe there is.

 

[T_Fishaa]

Any Stihl 1128 or 1125 series parts? Pm me if you do please

i have some not many! have used parts

 

[Woodslasher]

I do not believe there is.

Didn't think so, but like my old boss used to say, "You'll never get anything if you don't ask!"

 

[T_Fishaa]

NOS 044 Crankcase. Original wrist pin would have been 12mm to the best of my knowledge. Serial number on inner crankcase half pictured below