Frank Rizzo
Custom Saw Modification 241c-441c,660 specialist
???The timing advance really made a difference.
???The timing advance really made a difference.
Not only did I watch but I timed the cuts ...View attachment 686257
Lad.......it ain’t worth it.So because you think your observation with a stop watch, the timing advance didnt make a difference?
That would be interesting.........
Well I can't sleep so here is the footage I have, similar vid as Brad's, but why not.
Well I can't sleep so here is the footage I have, similar vid as Brad's, but why not.
Do you feel the torque is comparable to a ms461?
Plus one there the guy really needs to get a life .Instead of shooting down and criticising people trying to help others should be offering constructive criticism instead of BSLad.......it ain’t worth it.
He has been thrown off more forums for his BS ........
Twisted innuendo is the kindest thing you can say about him.
Just put him on ignore for a shorter more informative build thread or read his stuff and pity Fwank........
And it is one of the few times the number of likes....or lack there of in his case......means something
Just ignore him he’s pushing for everyone to biteDid you not watch Brad's video?
I guess that’s good for us and bad for the porters. I wish this saw would get released in the US already. A couple years ago I was holding off buying a 461 for this saw. I’m glad I didn’t wait too longI ran a 461 for a few cuts years ago, so I can't tell you one way or the other. However I would say it has more torque than a 046. I personally don't know if I would even port a 462 after running this one. That said if porting the gains are significant, this saw may be on a new level, but for me they need to be significant gains. I honestly don't know how much is left on the table, sure a bit more compression will help, and likely some transfer work, but with what I've seen and having talked to other builders, it's clear manufactures are listening in on all of us lol. Things like the squish bands and squish clearance in some of the newest saws are close to what you want in a ported saw stright from the factory, same with some of the port timing, this was not the case just a few years back. IMHO some of this started with the Dolmar 7900 and what they did with that saw, making it a factory hot rod with low weight for it's displacement, at the time that saw was a game changer in IMHO.
Plus one there the guy really needs to get a life .Instead of shooting down and criticising people trying to help others should be offering constructive criticism instead of BS
Enter your email address to join: