Delano1981
ArboristSite Member
Hello.
I just finished rebuilding a Stihl 038 Magnum and I have a question about a part that shows in the parts list but is missing on my saw. I have attached the pages from the 038 IPL showing part number 4 called baffle. My saw is missing this part. I was wondering if it is supposed be there on my saw, or is it not necessary. Another reason I am asking is that the choke flap in the after market air filter I used does not make enough contact with the control switch to activate for cold starting. It took me a little while to figure out the choke was inside the filter after pulling and pulling with no start. I finally just took the filter off and plugged the carb with my thumb. It started in two pulls doing this. Anyways, I'm wondering if the baffle is needed to move the filter closer to the switch shaft for better contact.
Thanks
I just finished rebuilding a Stihl 038 Magnum and I have a question about a part that shows in the parts list but is missing on my saw. I have attached the pages from the 038 IPL showing part number 4 called baffle. My saw is missing this part. I was wondering if it is supposed be there on my saw, or is it not necessary. Another reason I am asking is that the choke flap in the after market air filter I used does not make enough contact with the control switch to activate for cold starting. It took me a little while to figure out the choke was inside the filter after pulling and pulling with no start. I finally just took the filter off and plugged the carb with my thumb. It started in two pulls doing this. Anyways, I'm wondering if the baffle is needed to move the filter closer to the switch shaft for better contact.
Thanks