Howdy,
I believe you will be far happier with the Jonsereds 2149. Equip it with 3/8 professional chisel chain, if you want to do some serious woodcutting. I have a friend who uses one of these for professional harvesting of firewood and christmas trees every year. The weakest link on it is the damn choke button design. The damn plastic lapse of some engineer's imagination, sticks out right where it will snag on your boot laces when starting the cold saw. After you replace this choke design with a solid wire one; (I made one out of the choke for a 140 Husky by straightening out the bend in the middle of the wire to lengthen it to fit) You will have an excellent chainsaw.
The saw runs almost too well. You need to keep it correctly tuned and with a 50:1 mix with top quality aircooled two cycle oil and 90 plus octane gas. I have found this model tends to carbon up badly if used with lesser quality mix oils. I'm not sure why, but possibly because of the small capacity exhaust hole in the muffler and the small firescreen. The firescreen is an excellent design however and easy to clean with a butane torch.
Regards,
Walt Galer