Here are IMO the most common husky screws. I measured the length in inches so you'll have to convert them to metric.
M5 on the top left are general use.
M6 is only used on some saws for the muffler to cylinder.
The partially threaded M5 bolt on the top right is used for AV limiting pins on 365/371/372 and 394/395 saws.
The M5 Phillips/slotted heads on the bottom left are top cover screws:
Left is used for most 3 series saws. Like the 372, and 395. Also used for the side cover through the chain brake handle on the 365/371/372 saws.
Right is used for most 2 series saws. Like the 272, 288, and the 50/51/55 series.
M5 Phillips/slotted heads on the bottom center are side cover screws:
Left is most 2 series saws.
Middle is most 3 series saws.
Right is most plastic cased saws.
M6 plastic screw on the bottom left are used to hold the front handle on various saws and the M5 one is used on some plastic saw models for other things.
Any other bolts/screws that might be needed you can get from any hardware store or are specific length carb/muffler bolts.
View attachment 392641