just picked up a husqvarna 480cd??

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cutforfun

Addicted to ArboristSite
Joined
Sep 19, 2010
Messages
1,181
Reaction score
430
Location
Palmer Mill, Oregon
I picked up a husqvarna 480cd last night and i am wondering how it stacks up against the modern saws?

The piston looks great and it has good spark, i pulled the carb and it is sitting in carb cleaner as we speak. the fuel line is in tack,but i need to find a new one(its pretty sticky). The bar oil line was torn under the muffler but it was right at the connection so i was able to cut it and just hook it back up. what else should i look out for on these old saws, i have picked up a few husqvarna's lately (385 and 570) and the are not as bad as everyone says:msp_biggrin:

Pics coming
 
It basically is the last version of a late 1960s design, and was outdated when the 181se replaced it in 1981/82 - so it has been outdated for 30 years. :msp_wink:
 
I bought a new 480 years ago,it was a pretty good saw but did not do so well in cutting contest back then.

A few years ago my friend and I were cutting wood together. He had his 480 and I had my homelite XL925 I think they are the same displacemen. The homelite was hands down faster in the wood we were cutting,(about 20" elm). I realize there are variables but the homelite was certainly stronger.
 
The Xl-925 is listed at 5.01 cu. in. The 480CD Husky at 4.77 cu.in. I owned several 480's. Cut a lot wood with them. I also own a nice SXL 925. I'll take the 480's anti vibe any day over the Homey. My last 480 was stolen in 84, so bought a 181SE. Great saw. I recent found a 480 on ebay. Put a 30" Sugi Hara bar on it. Recently found a 28" General roller nose bar for the 925. Haven't ran it yet though.
 
what did the 480 go for on ebay, nothing selling on there right now, you are the first person to say something good about the saw and i was begining to worry that it was a complete pos. i put the carb back together and it fired right up. to late to play with it to much but it seamed to run good
 
Last edited:
Value, I think is partly eye of the beholder, but not an expert on that particular saw value. Saws are also the eye of the beholder, and yeah some are just plain outdated. But some of the Husky line was ahead of it's time back then, and some are still top runners along today's best. A few told me my 2101 was outdated. It outcuts the stock saw's in its class today, newer models. Those husky's were built so well. I forget the max rpm on the 480, it will probably be slower than today's models, but you will make up for it in torque. You will be fine good saw man.
 
Can't remember the year early 80's I think. Bought a 480cd and cut a lot of trees with it. I cut steady for 1yr with that saw. Fellow logger with a pioneer p51 couln't believe the amount of wood it cut in a day. Good memories with that saw.
 
Well my 2 cents worth on the subject , I had a basket case brought to me and i rebuilt it only had money for a new piston and carb kit in it and was a good saw good (heavy) saw . I sold it to some guys logging said they needed a reliable back up . I personally would have found somthin newer but hey give the buyer what they want right .
 
i did not need it, i was hoping it would be a 2100 when i went to buy it, all i had to go with was a really bad pic from a cell phone. i could make out the rear load on the oil and mix so i went for it. i had not scene of a 480cd tell i got home last night and did a little reading. i just did not want to put to much money into the thing. i will go out and cut with it tomorrow then decide.
Thanks guys
 
i did not need it, i was hoping it would be a 2100 when i went to buy it, all i had to go with was a really bad pic from a cell phone. i could make out the rear load on the oil and mix so i went for it. i had not scene of a 480cd tell i got home last night and did a little reading. i just did not want to put to much money into the thing. i will go out and cut with it tomorrow then decide.
Thanks guys

you'll like the 480, i have three of them!, two nice ones and one that is a great work saw, may want to check the av mounts, the front lower ones go first, otherwise great saws:popcorn:
 
I bought a new 480CD in 1980, same year Deb and I got married. They are both still around, look great and still work like they are supposed to!

They are excellent saws, dubbed in the later 1980's as a tad overweight for the cc's. They are not lacking in power, but not nearly as strong in the upper rpm's as newer designs. They are absolutely unstoppable with a 20" bar in place. I use a 24" bar on mine, and that's about as much bar as you are going to want on one.

A few years ago I grabbed up a super clean 181SE with over 180psi compression. It considerably stronger in the cut than the old 480CD, and sports a 28" bar. I still LOVE running the old 480, and recently aquired a new top cover and chain brake for it. It has seen considerable use every year since 1980, never needed a fuel line or carb kit to date. The kill switch was replaced last year, and I was lucky enough to find a tank vent for it as well. Never needed anything else, and it runs as good as or better today than when it was new......Cliff
217336d1326549133-husqvarna-480-002-jpg
 
Last edited:
I bought a new 480CD in 1980, same year Deb and I got married. They are both still around, look great and still work like they are supposed to!

They are excellent saws, dubbed in the later 1980's as a tad overweight for the cc's. They are not lacking in power, but not nearly as strong in the upper rpm's as newer designs. They are absolutely unstoppable with a 20" bar in place. I use a 24" bar on mine, and that's about as much bar as you are going to want on one.

A few years ago I grabbed up a super clean 181SE with over 180psi compression. It considerably stronger in the cut than the old 480CD, and sports a 28" bar. I still LOVE running the old 480, and recently aquired a new top cover and chain brake for it. It has seen considerable use every year since 1980, never needed a fuel line or carb kit to date. The kill switch was replaced last year, and I was lucky enough to find a tank vent for it as well. Never needed anything else, and it runs as good as or better today than when it was new......Cliff
217336d1326549133-husqvarna-480-002-jpg
hey cliff, wanted to see if you know if there was more than one wrap handle used on these saws (not talking about a full wrap), two of mine have a "tall style" and one is "low", the low one looks much better on these saws, ipl that i have only show one part number:confused:
 
what did the 480 go for on ebay, nothing selling on there right now, you are the first person to say something good about the saw and i was begining to worry that it was a complete pos. i put the carb back together and it fired right up. to late to play with it to much but it seamed to run good

I honestly don't remember what I paid. It came out of BC, Canada, which is really just about 125 mile up the road from me, but shipping was still a little steep. I really liked my 480's. Ran 30" bars, 3/8 X .050 skip tooth full chisel on them. I was sorry that Husky dropped them, until I bought my 181SE:smile2:
 

Latest posts

Back
Top