Large dawgs and roller chain catch

[palogger]

I am wanting to get a set of the large dawgs and the roller chain catch for the new MS460 that i am getting in the next couple days and want to make sure i have the right part numbers

Outside 1128-664-0501
Inside 1122-664-0506
Chain Catcher 1122-650-7700

 

[pbtree]

Send a PM to Lakeside...

 

[Spotted Owl]

I am wanting to get a set of the large dawgs and the roller chain catch for the new MS460 that i am getting in the next couple days and want to make sure i have the right part numbers

Outside 1128-664-0501
Inside 1122-664-0506
Chain Catcher 1122-650-7700

Call Madsen's. Tell them you want a set of big dawgs with the catcher for a 460. A couple days later it will be on your door step. I think 25 bucks is about what I just paid for a new set.

Owl

 

[OilHead]

Call Madsen's. Tell them you want a set of big dawgs with the catcher for a 460. A couple days later it will be on your door step. I think 25 bucks is about what I just paid for a new set.

Owl

I didnt like those big dawgs on the 440 & put them on the 066 .

 

[Roy Cobb]

Dawgs

I am wanting to get a set of the large dawgs and the roller chain catch for the new MS460 that i am getting in the next couple days and want to make sure i have the right part numbers

Outside 1128-664-0501
Inside 1122-664-0506
Chain Catcher 1122-650-7700

Thats what i have for PN'S, don't forget the screws and nuts for the outside dog. Screws= 9008-319-0960
Nuts = 9214-320-0700

 

[blsnelling]

I think Madsens dawgs are a lot larger than the ones from Stihl. Too big IMHO.

 

[tree_beard]

a couple more canine questions...

am i right in thinking that the 460 and 440 dawgs are interchangeable?

is there a set of 'small' double dawgs (for 044 specifically)?

are stihl part numbers the same internatonally (is there one digit in the p/n that donates country of origin like saw serial no.'s)?

thanks guys

 

[palogger]

hey yall thanks for the replies but the dealer had them in stock so i didn't need the numbers but thanks anyways

 

[Tzed250]

am i right in thinking that the 460 and 440 dawgs are interchangeable?

is there a set of 'small' double dawgs (for 044 specifically)?

are stihl part numbers the same internatonally (is there one digit in the p/n that donates country of origin like saw serial no.'s)?

thanks guys

The 440 and 460 dogs for the outside are different due to the longer spacing between the bar studs and the front of the crankcase.

 

[teacherman]

I think Madsens dawgs are a lot larger than the ones from Stihl. Too big IMHO.

Does anyone have a picture of the Madsen big dawgs on a 44 or 460?

I would like to put some larger ones on my saws.........

Or, would anyone be willing to trace out a pair of the oem big spikes on paper and I could make some?

How does 1/4" thick T6 or other hi performance alloy sound for sum custom dawgs? Or would it not hold up?

 

[Tzed250]

Does anyone have a picture of the Madsen big dawgs on a 44 or 460?

I would like to put some larger ones on my saws.........

Or, would anyone be willing to trace out a pair of the oem big spikes on paper and I could make some?

How does 1/4" thick T6 or other hi performance alloy sound for sum custom dawgs? Or would it not hold up?

1/4"!!!!!!!???????? That would be battleship!!!!!


How about 1/16 (.063")?

 

[teacherman]

1/4"!!!!!!!???????? That would be battleship!!!!!


How about 1/16 (.063")?

1/16" aluminum? 3/16 then.

 

[Bowtie]

Does anyone have a picture of the Madsen big dawgs on a 44 or 460?

I would like to put some larger ones on my saws.........

Or, would anyone be willing to trace out a pair of the oem big spikes on paper and I could make some?

How does 1/4" thick T6 or other hi performance alloy sound for sum custom dawgs? Or would it not hold up?

Hey Jon I have a tracing already of 066 spikes, I could mail you a copy if you want.

 

[Bowtie]

Hey Jon I have a tracing already of 066 spikes, I could mail you a copy if you want.

Or I could make you a set, I have made good quality sets before, and I have pics to prove it!

 

[Tzed250]

Does anyone have a picture of the Madsen big dawgs on a 44 or 460?

I would like to put some larger ones on my saws.........

Or, would anyone be willing to trace out a pair of the oem big spikes on paper and I could make some?

How does 1/4" thick T6 or other hi performance alloy sound for sum custom dawgs? Or would it not hold up?

1/16" aluminum? 3/16 then.

When you said high performance alloy I thought of high nickel alloy (Monel, Inconel) or Titanium...

 

[Bowtie]

I would NOT use aluminum. It WILL bend way too easy. Ask me how i know...

 

[teacherman]

Or I could make you a set, I have made good quality sets before, and I have pics to prove it!

Will they fit on 44 or a 460?

 

[teacherman]

I would NOT use aluminum. It WILL bend way too easy. Ask me how i know...

A little bird told you?!?! :monkey: :greenchainsaw:

 

[husky455rancher]

if you tried 6061 .190 or 60 6061 .250 aluminum i bet it would hold up pretty decent. gives me an idea, if my 372 ever gets here go go usps then imm make a couple sets......Mike

 

[SRT-Tech]

think those Big Dawgs will fit on a Echo CS330T top handle? :biggrinbounce2: :biggrinbounce2: :hmm3grin2orange: