Let's see your husqvarna

[blueknobbuck]

This is the only husqvarna that i own

 

[cus_deluxe]

stoopid sideways photo

 

[bullrider]

Just had to get them out and clean and service them all Saturday when it was so nice out side .Ready to cut a little when it dries out some.

 

[KG441c]

View attachment 411514 Masterminded 390xp

Triple ported muffler

 

[abigdiesel]

 

[Nitroman]

I have a couple 394's, a 137, and the nightmarish 3120. But they are at the storage right now. So I give you the 146 in 9.3x62mm.

 

[Tjcole50]

Can't stay outta this one! Just put the sugi on 550xp. Went from 18 to a 16 and first time I picked it up it will officially stay a 16" saw. Just feels awesome

 

[tonil76]

Here is my collection

 

[Festus]

Here's my 394 from the weekend after I bought it. Here it has a 32 inch bar with .404 chain. I have since replaced the bar and chain with a Husqvarna 36 inch bar with 3/8 chain. I also ended up replacing the complete carburetor.

 

[bikemike]

Here's my 394 from the weekend after I bought it. Here it has a 32 inch bar with .404 chain. I have since replaced the bar and chain with a Husqvarna 36 inch bar with 3/8 chain. I also ended up replacing the complete carburetor.
View attachment 412093 View attachment 412095

.404 is a mean chain

 

[MGoBlue]

394 is a mean saw!



I need to take some more recent shots!

 

[old-cat]

Mah beater 350 saw!
All the crappy parts that show up get put on this saw.
The combustion chamber is totally cratered from detonation, the front handle is badly cracked.
BUT the saw is built to last! It's my gas mizer, flat top piston, tight squish, no port work.

 

[Nitroman]

.404 is a mean chain

True. I run .404 exclusively on my 394 and 3120. I'd run it on the 137 if the thing would pull it. I truly believe it cuts faster.

 

[bikemike]

View attachment 412106
View attachment 412107
Mah beater 350 saw!
All the crappy parts that show up get put on this saw.
The combustion chamber is totally cratered from detonation, the front handle is badly cracked.
BUT the saw is built to last! It's my gas mizer, flat top piston, tight squish, no port work.

Id run the crap out of the saw. Only thing i don't like to se on newer saws is primer bulbs

 

[KenJax Tree]

They aren't primers anymore they're purge bulbs....no matter how many times you push it you won't flood the saw. All it does is get the air outta the carb so it starts easier.

 

[old-cat]

They aren't primers anymore they're purge bulbs....no matter how many times you push it you won't flood the saw. All it does is get the air outta the carb so it starts easier.

Stupid STIHL calls it a fuel pump!

 

[SawTroll]

They aren't primers anymore they're purge bulbs....no matter how many times you push it you won't flood the saw. All it does is get the air outta the carb so it starts easier.

...or out of the fuel line, and replace it with fuel? Any overflow, that would flood the saw, goes back into the tank trough the overflow line - or something like that?

Regardless, it is a nice item when a saw has been sitting for a while.

 

[bikemike]

They aren't primers anymore they're purge bulbs....no matter how many times you push it you won't flood the saw. All it does is get the air outta the carb so it starts easier.

A good running engine dont need them. But it does save on recoil parts

 

[bikemike]

My echo 340 t has one and i never used it. One day il find a rubber plug to replace it with

 

[KenJax Tree]

A good running engine dont need them. But it does save on recoil parts

Saves recoil parts? Are thinking decompression valve?

Edit: nevermind i see your pic of the purge blub.