Lombard chainsaws

[MS460WOODCHUCK]

IIRK they use a Hoffco Comet clutch. But. one from a Homie SXL might work.

I'll check the milk crate saw.

The spur/drum is Oregon# 30688. 3/8" x 7.

Edit: Checked on the Homie clutch and it is a no go.

I actually think my spur is good just was not sure if it was the correct one. I need a clutch for sure though it won't stop spinning at idle no matter how low I adjust it and if I grab it to try to stop it it will stall the saw. Did you ever get a chance to check the milkcrate saw?

 

[67L36Driver]

I actually think my spur is good just was not sure if it was the correct one. I need a clutch for sure though it won't stop spinning at idle no matter how low I adjust it and if I grab it to try to stop it it will stall the saw. Did you ever get a chance to check the milkcrate saw?

Clutch was junk. Shoes worn off real crooked and one spring missing.

 

[67L36Driver]

This is a carcass I picked up recently. I plan to find all the parts for it someday.

Someone posted Lombard parts on the Old Mag. Swap thread yesterday. http://www.arboristsite.com/chainsaw-stickies/192591-90.htm#post4272664

I have a clutch cover, air cleaner cover and recoil.....................................................................................

 

[cowroy]

Someone posted Lombard parts on the Old Mag. Swap thread yesterday. http://www.arboristsite.com/chainsaw-stickies/192591-90.htm#post4272664

I have a clutch cover, air cleaner cover and recoil.....................................................................................

I sent him a message. Thank you very much for remembering me. If there is anything you might be interested in I have..... several poulan saws, parts, couple a big homelites, basically a lot of stuff I will never get around to fixing. Just shoot me a pm of what you need for the parts, trade or cash. Thanks again.

 

[67L36Driver]

This looks good: Cambell Hausfeld Lombard Super 42 Chainsaw | eBay

May take a spell finding the missing parts but, it looks like a very low hour powerhead.

A runner from the same seller: http://www.ebay.com/itm/Lombard-Super-42-Chainsaw-/261228976892?pt=US_Chainsaws&hash=item3cd275dafc

 

[chainsawlady]

Lombard sprocket

I picked up another lomard ap-42 today from craigslist. It runs great but needs a clutch. Can anybody tell me where I may be able to find one and possibly a sprocket and bearing also?

MS460woodchuck
Checking my Oregon power mate sprocket list and it says 68019 for AP42 Lombard. I have two of them with 3/8 rim but that could be changed.
chainsawlady

 

[leeha]

Here is the all black Lombard i got a few weeks ago. This has the
anti vibe as well. Never seen one like this before.


Lee

 

[67L36Driver]

Here is the all black Lombard i got a few weeks ago. This has the
anti vibe as well. Never seen one like this before.


Lee

Only the second one I ever seen.:msp_thumbup:

 

[67L36Driver]

This looks good: Cambell Hausfeld Lombard Super 42 Chainsaw | eBay

May take a spell finding the missing parts but, it looks like a very low hour powerhead.

A runner from the same seller: Lombard Super 42 Chainsaw | eBay

Mo.Jim was by here yesterday with the above Cambell Hausfeld. :msp_thumbsup: Clean powerhead with monster compression.

 

[cowroy]

Mo.Jim was by here yesterday with the above Cambell Hausfeld. :msp_thumbsup: Clean powerhead with monster compression.

I believe that seller is Boda65, a member here. I know he had one of the CH versions at the WCOhio GTG.

 

[cheeves]

That saw was made through several ownership changes -- I seem to recall American Lincoln and Desa as well as Campbell-Hausfeld. The basic saw design stayed pretty much the same except for the AV and chain oiling. I still flip one now and then. I have been paying around $40 at pawnshops for sound runners. They are easy to work on. I wonder if the design was copied from the XL-12.

I used to wonder if they weren't a copy of the XL-12 myself! Look just like them but ran better i think! Used one in the 70's pulp logging in Carver. Great running saw, but remember the oiler being a problem. Loud too!!

 

[leeha]

This Lombard Super L something arrived today. I think it's a Super L60
but not to sure. Don't know if it's the AH47 or AH58 motor. Has sweet
compression but thats as far as i have gone except a good cleaning.
It's a well used saw and someday will get her up and running.


Lee

 

[old 040]

This Lombar Super L something arrived today. I think it's a Super L60
but not to sure. Don't know if it's the AH47 or AH58 motor. Has sweet
compression but thats as far as i have gone except a good cleaning.
It's a well used saw and someday will get her up and running.


Lee

looks like the ah58, the 58's have a removable head..................

 

[old 040]

wanted to add, this series of the 58 are the "third port" version, also checked mikes site, it lists this saw having an ah47, but it still looks like a ah58 to me..................040

 

[old 040]

my bad.......there were two variations of the ah47, yours should be the ah47 with the third port design, just wanted to add...............040.........

 

[leeha]

I thought it was the AH47 as the head is not removable.





Lee

 

[67L36Driver]

Small example.

Hardly ever see 'em come up for auction.

Vintage Lombard Chainsaw with 14" Bar Chain | eBay

 

[67L36Driver]

Bump. This has sunk too far.

 

[workshop]

Spoke with Carl on the phone last night and got inspired to look a little closer at an old Lombard I've got . Found the recoil pully was broke in half. Looking it over and found everything else to be there, except bar and chain. An old XL12 pully fixed the recoil. Found out it has spark and will pop on fuel dribbled in the carb. Looks very promising, all I need is a bar and chain. I think it will make a good runner. Thanks for the inspiration Carl.

 

[67L36Driver]

Steve: Lombards take your garden variety Mac bar or, if you use spacers, a Homie bar. The right coil extension spring cut into short lengths is what I use to bring 5/16" bar studs up to 3/8".