Modding The MS200T

[Mastermind]

Here's a couple pics of the little feller. It was a bit long in the tooth so a new carb, rings, and seals were installed.

 

[Rudolf73]

What does a new carb go for Randy?

 

[Mastermind]

What does a new carb go for Randy?

I'd have to check.....too many irons in the fire to remember right now. I'll try to remember to post that tomorrow when the shop is open.

 

[Zombiechopper]

Stihl usually wants 140 for the carb

 

[booger1286]

So are you widening intake nowadays or just smoothing them up and lowering them?

 

[angelo c]

Stihl usually wants 140 for the carb

I get the older 020t carby for $88 ..the one w/o the accelerator pump issue.

 

[angelo c]

Funny but I always wondered if someone could tweak a 192t and get some "gains". always thought there was more to recover there. I guess Randy will find out what was left on the drawing board for the 200

A

 

[hangfirew8]

Stihl usually wants 140 for the carb

Favorite Stihl dealer quoted me $110. Didn't ask not-so-favorite dealer. Another favorite Stihl shop sold me a used carb (still have to identify it) for $50. So prices vary.

HF

 

[stihl86]

List price is about $93.00. How a dealer can jack that price up is beyond me.

 

[TimberMcPherson]

I get the older 020t carby for $88 ..the one w/o the accelerator pump issue.

Which one is that?

 

[Eccentric]

Randy...

After your through messin' round with dem new fangled Stihlz with those short bars - heck, I have more d/links on the top of the bar, than they do all 'round! Ya wana play 'round with an '80's Homelite in the 80's cc range?!?!



(Somewhat kidding, but, mostly serious (have a 540 that needed some TLC) - been sittin' for a day or so.... )

I'd like to see what Randy can do with a 540/8800 Homelite.

 

[Mastermind]

Well the little saw didn't want to make the rpm I thought it should.....so I took off the air filter and tried it. Holy Smoke!!!!!! It was hitting 15,800. :msp_w00t:

I ordered a new air filter.

 

[lone wolf]

Well the little saw didn't want to make the rpm I thought it should.....so I took off the air filter and tried it. Holy Smoke!!!!!! It was hitting 15,800. :msp_w00t:

I ordered a new air filter.

There are two types of air filters for that saw one breathes better! Which one did you order?

 

[Metals406]

Well the little saw didn't want to make the rpm I thought it should.....so I took off the air filter and tried it. Holy Smoke!!!!!! It was hitting 15,800. :msp_w00t:

I ordered a new air filter.

Dang! That's humming along! :msp_scared:


So, you should probably just make a velocity stack fer it then. :msp_biggrin:

 

[Mastermind]

There are two types of air filters for that saw one breathes better! Which one did you order?

Good question.

I just called the dude and said "Yo......I need an air filter"

Which one should I have ordered?

I love this site BTW.

 

[angelo c]

which one is that?

c1q-s16a
1129 120 0601

 

[046]

waiting to see how this comes out...

 

[Chris J.]

Per Stihl IPL the two filter choices are

fleece 1129 120 1607

regular? 1129 120 1602

 

[Eccentric]

Good question.

I just called the dude and said "Yo......I need an air filter"

Which one should I have ordered?

I love this site BTW.

Bird catcher....

 

[lone wolf]

Per Stihl IPL the two filter choices are

fleece 1129 120 1607

regular? 1129 120 1602

The fleece one or flocked one is more restrictive it is the one that comes stock on most. The other one is smoother and flows a little better.