I have a push mower that would just pours gas from the carborator when not in use. I have replaced the carborator with a new one and it still does it. It will drain the whole tank. I noticed that the plastic tank has a lot of cracks in it but gas does not weep through them. Do you think the cracks in the tank are causing my problems?
Also, I can get it running but if I leave it level it floods out. But if I push the handle down so that the front wheels come off the ground and tilt it so the gas is pulled away from the hose to the carb it will run. I thought originally it was the float needle but with a new carb it acts the same.
Also, I can get it running but if I leave it level it floods out. But if I push the handle down so that the front wheels come off the ground and tilt it so the gas is pulled away from the hose to the carb it will run. I thought originally it was the float needle but with a new carb it acts the same.