asavageoak
ArboristSite Lurker
I bought a brand new bar and realized about 2 minutes into cutting why the last one had such a bad burr and was cutting terribly - no oil slinging.
Did some research, tore it apart (thank you to the folks who sent me the manuals) - after carefully inspecting all of the parts I realized the area between the pump and where the oil spits into the chain had to be clogged - sprayed it out with compressed air, cleaned everything up really well, reinstalled the pump, put it back together and fired it up. Happy to see I didn't need any parts.
Now for the tensioner - to me, the easy gear, cover teeth and slot look okay, but the bar stud looks as though it's mildly stripped. When I try and tighten the chain using it by hand, it has too much resistance (previously before the oiler issue, it tightened by hand no issues).
Here is a couple pictures of some of the parts in case someone needs to do it. Donyboy73s video on YouTube for a 250 worked perfectly for me.
Did some research, tore it apart (thank you to the folks who sent me the manuals) - after carefully inspecting all of the parts I realized the area between the pump and where the oil spits into the chain had to be clogged - sprayed it out with compressed air, cleaned everything up really well, reinstalled the pump, put it back together and fired it up. Happy to see I didn't need any parts.
Now for the tensioner - to me, the easy gear, cover teeth and slot look okay, but the bar stud looks as though it's mildly stripped. When I try and tighten the chain using it by hand, it has too much resistance (previously before the oiler issue, it tightened by hand no issues).
Here is a couple pictures of some of the parts in case someone needs to do it. Donyboy73s video on YouTube for a 250 worked perfectly for me.
Attachments
-
PXL_20240229_030539784.jpg2.5 MB · Views: 0
-
PXL_20240229_030620316.jpg2.7 MB · Views: 0
-
PXL_20240229_031057224.jpg3.3 MB · Views: 0
-
PXL_20240229_032336490.jpg2.4 MB · Views: 0
-
PXL_20240229_030543837.jpg2.1 MB · Views: 0
-
PXL_20240229_030509275.jpg2.7 MB · Views: 0
-
PXL_20240225_172844604.jpg2.9 MB · Views: 0
-
PXL_20240225_172840514.jpg2.6 MB · Views: 0