davidbradley360
ArboristSite Operative
greetings- I inherited a David Bradley 360 chainsaw from my grandfather- model 91760010, vintage 1957- I need a replacement FLYWHEEL for it- on the flywheel it says "Phelon 2120-H made for Power Products"
this has the Tecumseh Power Products 2-stroke engine, 4.7 cubic inch, 4 HP- AH-47
this engine was used on a variety of saws and other applications, the critical part is the Phelon 2120-H magneto type, which uses this flywheel, see picture
this flywheel is cracked in the keyway slot, it runs but won't for long, eventually it's going to break
will buy partial/nonrunning saws to get the parts I need, could also use the petcock fuel shutoff assembly and spark plug shroud that bolts on top of cylinder
thanks in advance
reply to this thread or email me at [email protected] or PM me on this board
this has the Tecumseh Power Products 2-stroke engine, 4.7 cubic inch, 4 HP- AH-47
this engine was used on a variety of saws and other applications, the critical part is the Phelon 2120-H magneto type, which uses this flywheel, see picture
this flywheel is cracked in the keyway slot, it runs but won't for long, eventually it's going to break
will buy partial/nonrunning saws to get the parts I need, could also use the petcock fuel shutoff assembly and spark plug shroud that bolts on top of cylinder
thanks in advance
reply to this thread or email me at [email protected] or PM me on this board