Need help stihl 041 farm boss

[Cas101326]

I need help.i have a 041 that leaked b/c oil into crank so I replaced seal and o-ring on oil pump but it still is locked up when the spark plug is in. I assume it's the oil still in there but how do I get it out?

 

[log_jammer]

Take sparkplug out, dump a liberal amount of premix in plug hole. Slosh it around for a while and dump back out. Hold saw upside down and pull starter a bunch of times until remaining premix comes out. Replace sparkplug and get it started. It's gonna smoke like hell at first, but should be fine after. Good luck!

 

[alexcagle]

Mosquito fogger...deluxe