Ahhhhhh interesting.
Newest addition 241c-m
- Thread starter KG441c
- Start date
Help Support Arborist Forum:
Ahhhhhh interesting.
KG441c
Keith
61-.043 3/8 picco micro
63-.050 3/8 picco
26-.325 .063
46-.404
33-3/8 .050
36- 3/8 .063
63-.050 3/8 picco
26-.325 .063
46-.404
33-3/8 .050
36- 3/8 .063
KenJax Tree
Terraphobic
KG441c
Keith
Sorry I didnt know the Huskys #s!!! Lol
KenJax Tree
Terraphobic
SawTroll
Information Collector
Yep, those are the really useful numbers if you have to use Stihl chain! Sadly, they mostly are special order at the Stihl dealers....
Good info keith..so add the " 3 " on the picco chains and that means it has the safety raker ?
KG441c
Keith
I ordered a bar adapter so I can use my Sugi 3003 20" bar on my 262xp!! Lol!!Yep, those are the really useful numbers if you have to use Stihl chain! Sadly, they mostly are special order at the Stihl dealers....
Yep, those are the really useful numbers if you have to use Stihl chain! Sadly, they mostly are special order at the Stihl dealers....
My dealer actually stocks 58 gauge niko , hes good on chains except PS
KG441c
Keith
I ordered a bar adapter so I can use my Sugi 3003 20" bar on my 262xp!! Lol!!Yep, those are the really useful numbers if you have to use Stihl chain! Sadly, they mostly are special order at the Stihl dealers....
SawTroll
Information Collector
The oil holes will not add up, because the 3003 (D025) bar has a wider tail end than a K095 bar - so that will not work.
Also, the common Stihl bar to Husky saw adaptors are for the Huskys with the large mount (9mm studs), and not for the small mount with 8.2mm studs.
KG441c
Keith
The oil holes will not add up, because the 3003 (D025) bar has a wider tail end than a K095 bar - so that will not work.
Also, the common Stihl bar to Husky saw adaptors are for the Huskys with the large mount (9mm studs), and not for the small mount with 8.2mm studs.
SawTroll
Information Collector
HUH?
KG441c
Keith
It will fit when Im done with it Niko!!! Lol! Never say never! A welder and a grinder will fix alot!!!!!HUH?
SawTroll
Information Collector
Of course it is possible to rework the oiler holes, but I don't think it is worth the trouble - each to his own.That will render it useless for the original purpose of course.
It is much simpler to just buy the correct bar!
KG441c
Keith
SawTroll
Information Collector
That list only mentions Husky models with the large mount, that I can see - not the 262.
KG441c
Keith
It says 262 on the top line Niko?
SawTroll
Information Collector
No, it says 162, which is an older and physically larger saw.
On the flip side, your Cannon Supermini will fit the 262xp, and then you can test your theory about the dl count as well!
KG441c
Keith
Well heck!!! Lol!!No, it says 162, which is an older and physically larger saw.
On the flip side, your Cannon Supermini will fit the 262xp, and then you can test your theory about the dl count as well!
