• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Newish ECHO cs- 450 Professional 45.0 cc Chainsaw + John Deere 50V

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Brushwacker

Addicted to ArboristSite
AS Supporting Member.
Joined
Jun 25, 2006
Messages
4,119
Reaction score
1,879
Location
Medaryville, IN USA
Slightly used, a friend of mine bought it, said he used it about 20 minutes. I ran it in my wood pile about 10 or so minutes to confirm it worked well. Echo's CS-450 rear handle saw has outstanding power with professional features. Has a 45 cc professional-grade engine with 10% more power than the CS-400. Built with a magnesium oil tank and engine housing making it lightweight and more durable. Features a high Performance Cutting System bar and chain for faster cutting and increased bar life and automatic, adjustable clutch-driven oiler. Weighs only 11.2 lbs. 1st $265 + shipping gets it.
The John Deere 50V I bought at an auction. Had old gas, I flushed out the tank, put in fresh fuel and sea foam, started and ran a couple cuts, then sharpened and cut a good bit of wood, about a tank of fuel with no problems. I did little to it so it wouldn't hurt to check her over closer and fine tune. These are nice old saws, , fairly light weight and decent 50cc power, anti vibe system and convenient adjustable oiler and idle adjustment both on top of saw. $60 + shipping
 

Attachments

  • DSCN3122.JPG
    DSCN3122.JPG
    190.5 KB · Views: 101
  • DSCN3124.JPG
    DSCN3124.JPG
    195.1 KB · Views: 97
  • DSCN3129.JPG
    DSCN3129.JPG
    196 KB · Views: 98
  • DSCN3130.JPG
    DSCN3130.JPG
    186.9 KB · Views: 94
  • DSCN3131.JPG
    DSCN3131.JPG
    171 KB · Views: 92
  • DSCN3134.JPG
    DSCN3134.JPG
    193.8 KB · Views: 90
  • DSCN3157.JPG
    DSCN3157.JPG
    188.4 KB · Views: 92
  • DSCN3160.JPG
    DSCN3160.JPG
    190.1 KB · Views: 92
  • DSCN3158.JPG
    DSCN3158.JPG
    189.1 KB · Views: 88
  • DSCN3164.JPG
    DSCN3164.JPG
    180 KB · Views: 79
I've run them and the 60v which is the same specs except cc and power. Not a very good power to weight but rock solid and steady. A friends Dad bought a 70v new, still in their family. I think the 50v 's power to weight doesn't feel bad at all especially for that era.
 
I have the owners manual and scrench that goes with it also and I would include an new extra chain either Stihl chisel or Oregon semi-chisel for an additional $10 with the sale. It has an 18" .o50 72dl bar and chain.
If you want the power had without a bar and chain I'd go $235 + shipping.
 

Latest posts

Back
Top