• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Newish ECHO cs- 450 Professional 45.0 cc Chainsaw + John Deere 50V

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Brushwacker

Addicted to ArboristSite
. AS Supporting Member.
Joined
Jun 25, 2006
Messages
4,124
Reaction score
1,886
Location
Medaryville, IN USA
Slightly used, a friend of mine bought it, said he used it about 20 minutes. I ran it in my wood pile about 10 or so minutes to confirm it worked well. Echo's CS-450 rear handle saw has outstanding power with professional features. Has a 45 cc professional-grade engine with 10% more power than the CS-400. Built with a magnesium oil tank and engine housing making it lightweight and more durable. Features a high Performance Cutting System bar and chain for faster cutting and increased bar life and automatic, adjustable clutch-driven oiler. Weighs only 11.2 lbs. 1st $265 + shipping gets it.
The John Deere 50V I bought at an auction. Had old gas, I flushed out the tank, put in fresh fuel and sea foam, started and ran a couple cuts, then sharpened and cut a good bit of wood, about a tank of fuel with no problems. I did little to it so it wouldn't hurt to check her over closer and fine tune. These are nice old saws, , fairly light weight and decent 50cc power, anti vibe system and convenient adjustable oiler and idle adjustment both on top of saw. $60 + shipping
 

Attachments

  • DSCN3122.JPG
    DSCN3122.JPG
    190.5 KB · Views: 101
  • DSCN3124.JPG
    DSCN3124.JPG
    195.1 KB · Views: 97
  • DSCN3129.JPG
    DSCN3129.JPG
    196 KB · Views: 98
  • DSCN3130.JPG
    DSCN3130.JPG
    186.9 KB · Views: 94
  • DSCN3131.JPG
    DSCN3131.JPG
    171 KB · Views: 92
  • DSCN3134.JPG
    DSCN3134.JPG
    193.8 KB · Views: 90
  • DSCN3157.JPG
    DSCN3157.JPG
    188.4 KB · Views: 92
  • DSCN3160.JPG
    DSCN3160.JPG
    190.1 KB · Views: 92
  • DSCN3158.JPG
    DSCN3158.JPG
    189.1 KB · Views: 88
  • DSCN3164.JPG
    DSCN3164.JPG
    180 KB · Views: 79
I've run them and the 60v which is the same specs except cc and power. Not a very good power to weight but rock solid and steady. A friends Dad bought a 70v new, still in their family. I think the 50v 's power to weight doesn't feel bad at all especially for that era.
 
I have the owners manual and scrench that goes with it also and I would include an new extra chain either Stihl chisel or Oregon semi-chisel for an additional $10 with the sale. It has an 18" .o50 72dl bar and chain.
If you want the power had without a bar and chain I'd go $235 + shipping.
 

Latest posts

Back
Top