Selling my nice ported 084. This saw has a lot of history as it started as @Totembear saw and was smoked on eBay and then rebuilt. I bought the saw from him and Jason Stratton redid it based on a few parts being sent to him. I have had it apart and everything looked good to me...I spun the base on my lathe to check it and I didn’t see anything that warranted me doing any work to it. I have at least 5 gallons of fuel through it. Probably 10. Always fires up and pulls a long bar very well.
I put a new handle on it 2 years back and also upgraded the cosmetics. There are a few cracks on the top cover as shown. It stays on fine...just wanted to be up front on that. I was running a max flow but have the covers as shown as well. I recently put a new buffer by the carb...it’s the 088 style. Dogs are custom 10 gauge stainless. They are both sharp and stout.
I do potentially have 50 and 36 inch cannon bars that could go with this.
$1,300 and the ride. PayPal F&F or add the 3%.
I put a new handle on it 2 years back and also upgraded the cosmetics. There are a few cracks on the top cover as shown. It stays on fine...just wanted to be up front on that. I was running a max flow but have the covers as shown as well. I recently put a new buffer by the carb...it’s the 088 style. Dogs are custom 10 gauge stainless. They are both sharp and stout.
I do potentially have 50 and 36 inch cannon bars that could go with this.
$1,300 and the ride. PayPal F&F or add the 3%.