Nik's Poulan Thread

[s sidewall]

I pulled the super down some today, one of the cylinder bolt holes is stripped out, will have to put a insert in the case for that. It has electronic ignition on it, does have fire. The piston looks almost new and so does the inside of the cylinder, it's nice and shinny. The other had no spark, pulled it down and found it has points. Filed and set gap, now it has spark, didn't pull the muffler on it to check piston or cylinder, forgot. That will be Saturday after next project. Did find the nose sprocket stuck on the banana bar, another project to look into.

Steve

 

[s sidewall]

Brother told me to take both and make one, can't make myself do that, believe I can get both running. Dad said today might have to build another barn just to put my saw in, that would be nice.

Steve

 

[s sidewall]

In case I'm not on tomorrow or Monday, Merry Christmas to all of my good friends on here.

Steve

 

[redunshee]

I posted an ad on here but I thought I'd hit you guys up too. I'm in need of a 3400 starter pulley oem number is 530069290i believe. Or the whole starter housing as long as the pulley teeth are good. Thanks

Found one. Pic attached. I'll remove pulley to

I posted an ad on here but I thought I'd hit you guys up too. I'm in need of a 3400 starter pulley oem number is 530069290i believe. Or the whole starter housing as long as the pulley teeth are good. Thanks

found one. I'll remove pulley to save shipping. Send address.

I posted an ad on here but I thought I'd hit you guys up too. I'm in need of a 3400 starter pulley oem number is 530069290i believe. Or the whole starter housing as long as the pulley teeth are good. Thanks

Found one. I'll remove pulley to save shipping. Provide address.

 

[RedneckChainsawRepair]

What are the other two saws? Non Poulans?


Sent from my iPhone using Tapatalk

Pic is there. 3 poulans 2300 3400 4200

 

[Acornhill]

Pic is there. 3 poulans 2300 3400 4200

oh i see now, picture was not there for me earlier, that is a somokin deal, the 4200 looks to have a black top on it?? the suga bar is cool also, there are a few guys from Pa. that would like to have those i am sure, hook em up Kev.

 

[kuhndog]

Yep, road trip to Stephen yesterday. Great hospitality and saw a lot of green and yellow. I found I can't keep them too many requests to fix them. To everyone have a great Xmas and Happy holidays. David

 

[RedneckChainsawRepair]

oh i see now, picture was not there for me earlier, that is a somokin deal, the 4200 looks to have a black top on it?? the suga bar is cool also, there are a few guys from Pa. that would like to have those i am sure, hook em up Kev.

They know already and about 4 guys wanted the 4200. ( I was wondering if a 5200 with 4200 recoil cover myself?)
Have to pick up local. He wont ship to the hook ups. Trust me I tried to even get him to ship to me then I would take care of who wanted what. But he wouldnt. So I quit trying.

 

[s sidewall]

Maybe a 4200 with a 5200 cover, would need to see tag to be sure.

Steve

 

[RedneckChainsawRepair]

Just showing to always check your saws you take in before selling to others. Even though you are told everything is right in the world.
The gasket is shown on outside of carb and between the air filter base. The metal part where gasket goes onto inside intake boot was missing. IMO it would probably have gotten a air leak and burned up if not caught by new owner.
Going to put in new echo oem lines for impulse and fuel while in there. Plus the right size fuel filter.

**** forgot pic of the HD 3 shoe clutch for new owner.

Turned out the 3450 parts saw I took in too has a busted tank on it I wasnt told about. I was checking it over to see what it needed for a build. Dang throttle lock area broke off the tank.

 

[RedneckChainsawRepair]

2 and 3 and 3450 builder tank

 

[Boomer 87]

I like those Tim Allen saws I'd like to find one cheap someday

 

[RedneckChainsawRepair]

I like those Tim Allen saws I'd like to find one cheap someday

I get them into collectors hands. No need for them on my shelf as I use others in 60cc.

A local logger wanted this one to limb with.
But I didnt really want the saw to get fubarred when I know guys want them for collecting. So there is 2 guys that want it when done on my site.

 

[Boomer 87]

Yeah if I had one itd have to be for display, i have way to many regular saws to take the chance blowing it up

 

[Acornhill]

I have 20 saws needing repairing on the shop floor everything from 1800- 4000 285 3300 335 330 Etc


Sent from my iPhone using Tapatalk

 

[s sidewall]

Got your hands full.

Steve

 

[ZR440man]

Hi! Just thought I would show what Santa brought (via Craigslist). Runs great. Got it and a Echo 452vl (with it's original case) for $180. I would say the 5200 pulls as hard as my P-50, but weighs less.

 

[s sidewall]

Nothing like getting the original case with the saw.

Steve

 

[fossil]

Hi! Just thought I would show what Santa brought (via Craigslist). Runs great. Got it and a Echo 452vl (with it's original case) for $180. I would say the 5200 pulls as hard as my P-50, but weighs less.View attachment 621108 View attachment 621109

Just curious, but do you have an "S" clip of some other spacer on the bar studs for that Windsor bar on the Dayton?

 

[ZR440man]

Yeah, the case is probably more rare than the saw. Guy said his dad bought them new around 1980. The Echo is like new.