If you had to run your business on 3 chainsaws What would they be and what size bar would you run? No modified saws here, only stockers. Rich.
Only 3 saws???
- Thread starter rahtreelimbs
- Start date
Help Support Arborist Forum:
jokers
Addicted to ArboristSite
What is this, April Fools? LOL. Russ
DDM
Addicted to ArboristSite
020 14" 026 18" 046 28"
Is a Pole Pruner considered a saw? Because i couldnt part with my HT75
Is a Pole Pruner considered a saw? Because i couldnt part with my HT75
Just to set the record straight, This is just for fun!!! I currently have more than 4 times the posted amount. Also if you guys won't go bigger than an 046 or 372, why? Rich.
Sethro
Heathen
Rich
066 20", 084 24",088 24":angry2: Big Balls
066 20", 084 24",088 24":angry2: Big Balls
Nelsonfry
What no climbing saw? Must be fun to prune with that 066. Rich
What no climbing saw? Must be fun to prune with that 066. Rich
John in MA
Addicted to ArboristSite
Hmmm. I haven't been in the industry, but...
015 12", 028 or 032 18", 111S 36"
How'd I do? Don't have an actual pruning saw yet.
015 12", 028 or 032 18", 111S
36"How'd I do?
Don't have an actual pruning saw yet.
thompson1600
ArboristSite Guru
Not in the business but around the house
I'm not in the business but for kicking around I have, 025 with 16" bar, 044 with 20" bar and 066 with 24" bar. I use the 025 and 044 a lot. The 066 is mainly used as a milling saw.
I'm not in the business but for kicking around I have, 025 with 16" bar, 044 with 20" bar and 066 with 24" bar. I use the 025 and 044 a lot. The 066 is mainly used as a milling saw.
tony marks
Addicted to ArboristSite
for my needs the cs3000 echo and the 028,get it done. got a couple of 36cc
saws solo and craftsman. for the third saw i guess. or mabe the 011avt..
yep believe id rather have it, if only 3 saws.that sucker cuts at least as well as the glut of 36-42 cc out there ,that ive seen.
saws solo and craftsman. for the third saw i guess. or mabe the 011avt..
yep believe id rather have it, if only 3 saws.that sucker cuts at least as well as the glut of 36-42 cc out there ,that ive seen.
Treehugger101
ArboristSite Lurker
Fer cryin' out loud who'd wanna run stock saws?
If I had to I suppose it'd be Husky 335xpt(still handles the best to me), Shindaiwa 488 (ultra reliable), Husky 372xp (barely above an 044, just a little extra zip and smoothness).
Round here I just don't run into much above 36" dbh very often so I can't justify anything larger. . .
If I had to I suppose it'd be Husky 335xpt(still handles the best to me), Shindaiwa 488 (ultra reliable), Husky 372xp (barely above an 044, just a little extra zip and smoothness).
Round here I just don't run into much above 36" dbh very often so I can't justify anything larger. . .
treeclimber165
Member A.K.A Skwerl
I've been climbing for a guy for 6 months now, we have 8 saws on the truck. The biggest is an 066 and we have pulled it out ONCE for a stump cut. This saw may be nice and all, but it does not make us money on a daily basis.
3 saws (that make me the most money)- Echo 3400, Stihl HT-75, Stihl 046.
sedanman
Just cut the piano!!
If I could only have 3 they'd be.
011AV (12 inch), I like my 015's and my 009 but both of these models lack anti-vibe.
026 (18 inch), mine is an early model with more grunt than the new version.
064 (28 inch), I rarely need saw this big but it's nice to know it's there.
011AV (12 inch), I like my 015's and my 009 but both of these models lack anti-vibe.
026 (18 inch), mine is an early model with more grunt than the new version.
064 (28 inch), I rarely need saw this big but it's nice to know it's there.
Tony Snyder
Addicted to ArboristSite
Echo top handle, Efco / John Deere 62cc with 20 inch bar, and Jonsered 2171 with 24 inch bar.
Newfie
Addicted to ArboristSite
346xp w/ 16" bar, 372xp w/ 20" bar & 385xp w/ 24" bar
Of course that's a hard choice because you have to leave out a 357xp and a 3120xp. No climbing saw, my 225 lb. is best kept on the ground.
Of course that's a hard choice because you have to leave out a 357xp and a 3120xp. No climbing saw, my 225 lb. is best kept on the ground.
Johnc(ks)
ArboristSite Lurker
As of today, my 3 favorites (out of an even dozen) are:
019T..14 inch bar
031AV..18 inch bar
and
(drum roll please)
David Bradley Three-Sixty with 20 inch bar and .5 pitch chain.
IF I won the lottery today...tomorrow there would be a;
MS200T..14 inch bar
MS260..18 inch bar
MS440..long and short bars
...sitting next to the new sports car, new 3/4 ton truck, new Harley, and new Jet-Skis in the garage.
John C.
019T..14 inch bar
031AV..18 inch bar
and
(drum roll please)
David Bradley Three-Sixty with 20 inch bar and .5 pitch chain.
IF I won the lottery today...tomorrow there would be a;
MS200T..14 inch bar
MS260..18 inch bar
MS440..long and short bars
...sitting next to the new sports car, new 3/4 ton truck, new Harley, and new Jet-Skis in the garage.
John C.
All Huskys:
335XPT-W
372XP-W
346XP-G
We just got the Greffardized 346, and it is amazing.
Had to include it, instead of my 3120XP-G, as, while it has had a lot of use lately, it does sit a lot from time to time. I have a 36 bar for it, but usually use the 42. Run 24-32 on my 372's, both modified, so the 066 is sitting more now.
335XPT-W
372XP-W
346XP-G
We just got the Greffardized 346, and it is amazing.
Had to include it, instead of my 3120XP-G, as, while it has had a lot of use lately, it does sit a lot from time to time. I have a 36 bar for it, but usually use the 42. Run 24-32 on my 372's, both modified, so the 066 is sitting more now.
ok, i guess nobody caught this the first time. my 3 favorite saws are:
066-32"
echo 3000-14"
and, easily the best felling saw ever produced:
MY 1957 CLINTON D35
why, you ask? simple. because if a tree is too dangerous for felling the conventional way, you just start her up, point it in the general direction of the tree, hit the gas, and the sheer noise from her will scare the tree so bad, it will just give up and lay right down!
066-32"
echo 3000-14"
and, easily the best felling saw ever produced:
MY 1957 CLINTON D35
why, you ask? simple. because if a tree is too dangerous for felling the conventional way, you just start her up, point it in the general direction of the tree, hit the gas, and the sheer noise from her will scare the tree so bad, it will just give up and lay right down!
