Partner Chainsaw Thread

[jonsered fan]

Kérhetnék egy kis segítséget, hogy beazonosítsam, hogy milyen modellt és kort látott így?

Hi ! R16. 1967,68,69 !

 

[Piotr Pakuła]

Mike gives the year of introduction 1967

 

[bryannewton]

Thanks yall

 

[Piotr Pakuła]

Model Profile: R16

 

[Jeff Lary]

is it February 11 1964?

 

[Piotr Pakuła]

you will not find out the specific production date from the Partner

 

[Piotr Pakuła]

I have to seal the hole in the air filter, some newer paper version of the P100Super

 

[Piotr Pakuła]

the wire to extinguish the engine evaporated ;-)

 

[Piotr Pakuła]

what is the metal button with chain P100 for?

 

[Piotr Pakuła]

here is the Partner exception because the plate says 1983

 

[Piotr Pakuła]

Partner S55 also with year plate

 

[Piotr Pakuła]

the outlet is black but there is no carbon gram, who will explain it to me? P100Super

 

[Piotr Pakuła]

The plates with the year of production were supposedly introduced in 1982

 

[Piotr Pakuła]

Has anyone figured out anything interesting about resuscitating the AV from the back handle of a toaster?

 

[Yukon Stihl]

Try some urethane adhesive like is used for windshields in cars and trucks
I fixed one on a MS201 Stihl seems to hold alright

 

[Piotr Pakuła]

see what a loose spur means, note that the original top hole is broken off

 

[magoo75]

I have to seal the hole in the air filter, some newer paper version of the P100Super

Hi, sorry for the delay but I'm only reading now.
For the air filter, open it in two pieces, then wash it very well. If the hole is small you can repair it with a little hot glue.
This is the filter of my P100 super:

 

[Piotr Pakuła]

it's like new, nice / how do you wash it so well?

 

[magoo75]

what is the metal button with chain P100 for?

The button is used to spray additional oil directly onto the chain when needed. It acts directly on a mechanical pump located in the crankcase behind the chain bar.

 

[magoo75]

the outlet is black but there is no carbon gram, who will explain it to me? P100Super

The chainsaw was used with the correct mix and very good oil ... or, seeing how the piston is new conditions, it was recently disassembled and cleaned everything.
This is my piston...