are you kidding? omg 2 6-pks or more a day?...
I’m running 24”, stock rim on the 79xx’s and 20”, stock rims on the 64xx’s. The 79’s do suck more fuel than the 64’s. Leaving them this way for my use.Any of you scroungers have any thoughts or suggestions about setting up the 7910 with a 20" bar and 8 pin rim. It would get used a lot more with a 20.
I walked upstairs last night with a beer in my hand and the wife just looked at me. I used to drink till I blacked out. Once i started i just didn't stop. Nowadays I'm lucky if i have 10 beers in a year. Never felt any physical difference but it maid me feel better about my self when I stopped drinking like I had nothing to live for.No that was pretty normal for me, sometimes 30 or more cans a day at times, sometimes 90 cans in 2 days sometimes more.
I don't mind a drink and can drink hence my decision I had to change and change I did, I don't drink alcohol at all now - I just stopped dead, I don't feel any better for it which is a bit disappointing in some ways but happy for now not to be drinking alcohol.
I have a 24 on the saw now. I dont use it cause I dont want to deal with the extra bar length when most of what I cut doesn't even need a 20. The 8 pin rim idea is more because I like to tinker, kinda how the 3/8lp conversion happened with the 490.I’m running 24”, stock rim on the 79xx’s and 20”, stock rims on the 64xx’s. The 79’s do suck more fuel than the 64’s. Leaving them this way for my use.
I walked upstairs last night with a beer in my hand and the wife just looked at me. I used to drink till I blacked out. Once i started i just didn't stop. Nowadays I'm lucky if i have 10 beers in a year. Never felt any physical difference but it maid me feel better about my self when I stopped drinking like I had nothing to live for.
my immediate area continues to provide a steady source of ez scrounge oak. older wood, but just fine for my outdoor fireplace, mr Brutus.
couple limbs picked up. was bigger (4-5) but had burned some by time I took pix.. the burl I keep. View attachment 726777
I run a 20 on my ms460. It's a very handy bar length for the wood I cut. I find I can cut 24-28" rounds from one side by overbucking from the top first then coming down. Most wood I cut is 18" or less which is perfect for the 20" bar. Longer bar would be justified if I cut more big wood. Mine has the factory 7 pin, I just file the rakers down some and it pulls it fine. Nice big corn chips! I have heard more experienced guys say to choose a bar longer than 90% of your wood. If you can keep the nose out of the cut, the bar will last longer and not wear right at the nose joint. You'd have to cut a lot more than me to worry about wearing out bars.Any of you scroungers have any thoughts or suggestions about setting up the 7910 with a 20" bar and 8 pin rim. It would get used a lot more with a 20.
I've got a pair of those two tone disco shoes from the 80's. The ones with 3" soles. Just sayin, there yours if you want them?
Cutting back or stopping the drinking is long term healthy for ya. Luckily, I realized I had to do it when I first got married and had a daughter. Many of my friends never changed, and we have buried a # of them and others are just disabled, many of them younger than me. It is a shame.
Guys that can't drive their nice cars any more, or don't get to see their Grandkids grow up … what a shame! I don't want that to be me!
I was thinking of using snow fence like a cargo net to hold against the page wire fence. I've been wanting to try building a beehive stack for a while ever since I read this book. Might have to give it a go.Maybe those would stay up a little better at your place.
When you were talking about the snow fencing where you saying wrapping the piles with it or putting it towards the top like was suggested with the longer wood, like stacking two rows 3' then set the fence on top, then add another foot to the top?
I think I hauled my last load in for the 18/19 season yesterday.
Not really, I was just trying to give James some hope. I was the first one on the MD U campus with a Disco Sucks T-Shirt. Just took a big majik marker and wrote it on a white shirt. Unfortunately, I didn't "trade mark" it and sell them, would have made a fortune.You WOULD have those..... wouldn’t you.....[emoji849].
I dont want to disrupt you wardrobe so you keep them brother.
Sent from my iPhone using Tapatalk
Enter your email address to join: