I was trying to do a series of tests of various small saws and chain combos last weekend but Youtube deleted my account. Going to re-upload to a different provider.
Looking at testing the following:
3/8 Low Profile in 12/14/16/18 inch bars. Then compare full chisel to semi chisel. I also have a loop of square ground 3/8 LP somewhere to throw into the mix. I’ll use the Husky 130 or 142 for this
I’m also going to test 3/8 LP, .325, and standard 3/8 on the same saw. Probably use full chisel chain for all of these. Muffler modded Husqvarna 340 for this test.
Finally I’m going to test out a couple bar lengths on the Poulan 5020 and also try skip versus full comp chain on the 20” bar.
Looking at testing the following:
3/8 Low Profile in 12/14/16/18 inch bars. Then compare full chisel to semi chisel. I also have a loop of square ground 3/8 LP somewhere to throw into the mix. I’ll use the Husky 130 or 142 for this
I’m also going to test 3/8 LP, .325, and standard 3/8 on the same saw. Probably use full chisel chain for all of these. Muffler modded Husqvarna 340 for this test.
Finally I’m going to test out a couple bar lengths on the Poulan 5020 and also try skip versus full comp chain on the 20” bar.