Stacked cord versus "thrown cord"

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
BPS. LLC

BPS. LLC

ArboristSite Operative
Joined
Aug 27, 2010
Messages
190
Location
Pennsylvania
Rather than take the time do this on my own, I thought I'd ask since I'm sure someone on here has done it before. A previous thread had me wondering, how many cubic feet of space a cord of wood thrown on a truck/trailer would take up.

Of course this would vary, but I was curious as to whether anyone took a stacked cord and piled it on a truck/trailer and measured the space that it took up...I wonder what the average would be? Just throwing out a number, I was thinking around 140, maybe 150 cubic feet at the most.
 
alderman

alderman

Addicted to ArboristSite
Joined
Jun 4, 2005
Messages
3,815
Location
Western Oregon
We did a measurement on a full size truck bed full to the top of the rails. Stacked it came in at a smidgeon under 1/2 cord. I would think thrown in would be quite a bit less.
 
RAG66

RAG66

ArboristSite Operative
Joined
Jan 27, 2010
Messages
174
Location
WASHINGTON
Sorry to be snobish but I think the only way to refute any questions is, it is always better to give it to them in a stack in the truck and if they wish measure the stack to prove the cubic feet. In less words "give just a little more", the customer will spread the word.
 
gilraine

gilraine

ArboristSite Guru
Joined
Nov 6, 2008
Messages
673
Location
norwich, ct
i sell 2 cord and the customer usually ends up getting 2.5 or more... the last time i did this the couple didn't expect me to come back with the second load... if your not sure, throw some more in..
 
BPS. LLC

BPS. LLC

ArboristSite Operative
Joined
Aug 27, 2010
Messages
190
Location
Pennsylvania
Sorry to be snobish but I think the only way to refute any questions is, it is always better to give it to them in a stack in the truck and if they wish measure the stack to prove the cubic feet. In less words "give just a little more", the customer will spread the word.

I stack wood for all my customers. I was just curious what a "piled cord" would come out to. I need to stack it to get two cords in my dump trailer. I wouldn't have guessed a 30% increase in cubic feet though.
 
blackdogon57

blackdogon57

Addicted to ArboristSite
Joined
Mar 24, 2008
Messages
1,156
Location
North of 45
I've always had a hard time getting 180 to stack out. I usually need around 210. At 210 the customer will always be happy. That's what I strive for.

Scott
:agree2::agree2::agree2:

180 cubic feet thrown = approx 1 cord . I always give a little extra if measuring this way. Customers never call to complain that they got a little too much but they will always call if they get shorted.

Stacking seems like a nice concept until you get into selling large volumes of wood. I dump my trailer, get paid, and leave.
 
NCPABill

NCPABill

ArboristSite Operative
Joined
Feb 14, 2010
Messages
209
Location
Pennsylvania
This might be slightly off track, but I loaded a face cord (1/3 full cord) into my small not long bed Tacoma and it was "thrown directionally" but not stacked. It was all I could get it and drive relatively safely down the road - humped in the middle and the top half was placed by hand to get it in.
 
Tim in NY

Tim in NY

ArboristSite Member
Joined
Mar 24, 2009
Messages
75
Location
Upstate New York
When I sold wood a long time ago (1980), a face cord tossed would nicely fill a full size (F150) bed even with the rails, with a bit of a hump in the middle.

I ripped a sheet of plywood down the middle and stood the pieces on top of the wheel wells, and covered the back window with a chunk of hardboard. Tossing that full was half a full cord (cut 16-18"), and all the old F 150 could handle.

Never had complaints on quantity, and it allowed us to split and load right in the woods. We did try to make sure we gave a little extra - it was worth it to avoid having to pile and measure.

Tim
 
slofr8

slofr8

ArboristSite Operative
Joined
Oct 6, 2007
Messages
123
Location
Northern Maine
I have a Dodge 1500 (1/2 ton).
I once hauled 2 loads of sand for a concrete project and the plant would weigh you light then loaded. First load I went until the rubber snubbers for my leaf springs made contact. Maybe a little more. 1900lbs. +/-. Didn't like that ride at all!!
Next load I left 1" before the snubber hit and it was 1200lbs. +/-. Way better.
Soooo.... when I bring in my seasoned Maple and Beech fire wood from my wood lot I just throw it in till it's more or less level with the top of the 6' box and that is 1'' space under my snubber. I just reach in behind the wheel and slide a couple fingers under it. My road is hilly and sometimes muddy so that's all I care to haul.
Stacked tight in my garage it comes out to just over 1/4 cord. Four trips would be a BIG cord. I also burn Quaking Aspen but I'll bet the same load weighs 1/3 less.
At first I would stack it in the truck too but it didn't make a whole lot of difference and I had to listen to the kids complain. :mad:
Dan.
 
Cerran

Cerran

Addicted to ArboristSite
Joined
Jun 21, 2007
Messages
5,364
Location
Hayden, ID
I only had to buy wood one year when I started burning at my current house since I didn't have a chance to get my own. However I must say the three firewood sellers I dealt with two tried to short me and the third did what you suggested, "give a little more". That guy got my repeat business that year and his number sent to several other people I knew looking for firewood.

Being honest and providing a little more firewood than purchased buys a lot of goodwill. I am still on great terms with the guy who sold me firewood the first year, even though I haven't purchased from him in more than 6 years.
 
Highbeam

Highbeam

ArboristSite Guru
Joined
Feb 8, 2008
Messages
507
Location
South Puget Sound, WA
By the way a 1/2 Ton pickup can hold a cord, but I'm not sure it could do a cord of hardwood:

This is about 3/4 Cord in this load:

Since the bed of a 1/2 ton and the bed of a one ton are the same size, you are right, a half ton can hold a cord.

That said, if I ordered a cord of wood and that load showed up I would be feeling like I got shorted. It doesn't look like a cord to me.
 

Latest posts

Top