![IMG_4324.JPG IMG_4324.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/230/230129-3eba18dfc7f4b756a57d6a97e9577d8d.jpg)
![IMG_4325.JPG IMG_4325.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/230/230130-e8bb3890f6c1a77704212f2cd6cedd67.jpg)
![IMG_4326.JPG IMG_4326.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/230/230131-f332674ca1f20f08d52337ac4dd94e23.jpg)
![IMG_4327.JPG IMG_4327.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/230/230132-51fda63228d035c50922f1dd1c361809.jpg)
![IMG_4328.JPG IMG_4328.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/230/230133-4923d8d955686387873ec692726ee41e.jpg)
![IMG_4329.JPG IMG_4329.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/230/230134-4286e6378df69cb3806af3081996d4ec.jpg)
![IMG_4330.JPG IMG_4330.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/230/230135-87c79dc24be21cee43565e95225e0ab5.jpg)
![IMG_4331.JPG IMG_4331.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/230/230136-e0faf88f1fc0b8a5ba5c2065a311368b.jpg)
![IMG_4332.JPG IMG_4332.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/230/230137-03749a65a3783532079c6fef6c0aae30.jpg)
![IMG_4333.JPG IMG_4333.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/230/230138-7a0a16573e621fe33231ca0c14e489d9.jpg)
Posting up these other builder saws and blower projects for sale.
Stihl MS250 - needs clutch cover, air filter cover, carb, and new engine.
(Sold)
Stihl MS180C - complete saw, with good Stihl pro chain... lots of new parts, I don't have time for near as many saws this year.... good piston and cylinder and didn't show any leakage when pressure/vac tested; also, I swapped an MS250 carb from another saw into this one... so it has some extra holes in the covers/handle.
(SOLD)
Husqvarna 335xpt- very good piston, needs recoil cover and several little parts and some TLC...
(SOLD)
Stihl BR550 backpack blowers- one is complete and runs, but smokes, the other needs a few parts and it has some crud under the exhaust valve causing it to leak air and not seal....
I was going to clean the one engine valve seat and install it onto the complete chassis of the smokey one...
Asking $150 plus shipping at cost for both of these together, just dropped price from $200 shipped...
Everything is negotiable!!
I am located in the Denver, Co area