jimmycrackcorn
ArboristSite Operative
Thanks for your help BigFir..
SugiHara and Oregon Bar overstock sale... from the Weedeaterman !!
- Thread starter watsonr
- Start date
Help Support Arborist Forum:
Thanks for your help BigFir..
Im 99% sure the bar I gave the link to is what you are wanting.... but you will need the adapter plate to fit it to your 562.
The "AT2U" sugi bar is a 18", 3/8", .050 Husky SMALL mount bar. (fitting the 346, 550, etc.)
The "AT2U" sugi bar is a 18", 3/8", .050 Husky SMALL mount bar. (fitting the 346, 550, etc.)
jimmycrackcorn
ArboristSite Operative
Yes! That link you gave me is the one I've was referencing that I believe will fit both brands with a adapter. For some reason I thought it was the same link I had given you regarding the AT.
Do you know where that adapter is on his site? I can't find it anywhere..
Anyways, thanks my friend.. I wonder why I was given that AT link.. Maybe he thought I was talking about a 560 as those are small mount right? Randy has been very helpful the past few times we've spoken.
Randy thinking it was for a 560 is a possibility, yes they take the small mount. Randy and Henry @ weedeaterman.com are very helpful and they will take care of you and help you out.
Here is the thread link for the adapters. http://www.arboristsite.com/community/threads/all-in-one-stihl-bar-adapter.244840/
I have also heard alot of good about Homelite410.
Here is the thread link for the adapters. http://www.arboristsite.com/community/threads/all-in-one-stihl-bar-adapter.244840/
I have also heard alot of good about Homelite410.
jimmycrackcorn
ArboristSite Operative
Thanks my friend, I'm sure I'll hear from them later today.
SawTroll
Information Collector
That's a really bad decision.
As far as I know, the SugiHara AT mount is a combination K095/K041 mount, that doesn't work well will K095 mount saws with captive bar nuts, like the 550xp, 545, 560xp and 555. Those need a pure K095 bar, and I know that SugiHara makes such bars.
Does anyone know if you can get k095 mount Sugi bars in 3/8 050 in 14"/16"? l need one for my 550xp! Don't care if its reduced wieght or not. Trolls rightin above post...the chain end up rubbing on the inside plastic of the cluth cover.
SawTroll
Information Collector
Cannon/Bailey adapter for Husky saws and homelite410 ones for Dolmars is how I "read" the situation - but I believe nstueve also make (or made) good ones for the Dolmars?
Anyway, I believe it is better to get the bars with the mount that you need, and avoid the combination AT and SV SugiHara mounts. They do make them.
SawTroll
Information Collector
watsonr
Addicted to ArboristSite
PM sent
KenJax Tree
Terraphobic
Well then i guess the one i bought on Ebay Isn't gonna work on my 550xp
So i guess i'll sell it when i gets here tomorrow.
Sent from my iPhone using Tapatalk
SawTroll
Information Collector
Well then i guess the one i bought on Ebay Isn't gonna work on my 550xp
I understand there are some simple tricks to make it work. like a piece of duct tape over the upper adjuster hole?
Far from ideal, but I have been told that it works.
KenJax Tree
Terraphobic
Trolls rightin above post...the chain end up rubbing on the inside plastic of the cluth cover.
What about this Niko?
Sent from my iPhone using Tapatalk
SawTroll
Information Collector
That wasn't my statement, and I didn't really understand it.
However, it is possible if you run regular .050 .325 chain on a narrow kerf bar on those saws - that is something you shouldn't do!
KenJax Tree
Terraphobic
I read someone put a piece of wood in the upper hole and cut it flush with the bar and it worked so i'll have to figure something out.
When i looked up the number on the Hev website the only number it showed was the AT number so maybe they quit making the K095 bar and just make the k095/041 bar now?
Sent from my iPhone using Tapatalk
When i looked up the number on the Hev website the only number it showed was the AT number so maybe they quit making the K095 bar and just make the k095/041 bar now?
Sent from my iPhone using Tapatalk
SawTroll
Information Collector
As I understand it they make both, and it is up to the distributers what they offer for sale?
jimmycrackcorn
ArboristSite Operative
Does weedeaterman have a contact #, as in a phone line to call? Can't find it on site, keep getting a yahoo email. I'll check the OP now too..
jimmycrackcorn
ArboristSite Operative
Randy, I never received that PM. I couldn't quote your last post to me either, I think something funky is going on with the site or this app.
