Morning all , real dark here now .
Sure is quiet in here....do I need to start a fight?
- Thread starter caleath
- Start date
Help Support Arborist Forum:
Icehouse
ArboristSite MVP
It's really dark here also, but won't be morning for a long time, it's only 9:30 pm. 
Finally got the checks yesterday afternoon by Certified Check! Been a long wait. They'd been on the Personnel Dir. desk for over a month! Senator will hear about it tomorrow!
Off to Salem, NH in a bit. Lot of pressure off!
Have to Thank You my friend for the help when we really needed it!
11:45pm and pizzing rain!
It was close to 30C here today so the wife and I high tailed it to the beach
Spain is that way .
West Coast is that way .
Once we got passed the rocks I found some supper
It cooled down to 20C after supper so off to the woodpile I went to work off the surf and turf LOL
It was a great day up here with big big skies
BTW ,,, the 361 Stihl Rocks !!!!!
Spain is that way .
West Coast is that way .
Once we got passed the rocks I found some supper
It cooled down to 20C after supper so off to the woodpile I went to work off the surf and turf LOL
It was a great day up here with big big skies
BTW ,,, the 361 Stihl Rocks !!!!!
The 361's are a great little saw, the only down side to them here is the oil pump out-put is too low for our hard wood, I have one with about five hours on it for that reason. I'll get around to doing the 461 pump up grade on it one day.
[Edit].......I absolutely hate those flipper caps!
What size bar are you running , up here you'll mostly see 16" and 18" , with the oiler maxed out it's almost empty after a tank of fuel .
Interesting....The 361's came from the dealers here with a 20"bar and 3/8' chain, the saw has no problem at all pulling that combo even in the hardest wood, though when cutting 8-10" dry hard wood you can actually hear the chain is running too dry.
Up here ,,16" right from the dealer , I'd like 70cc at 20" .
Icehouse
ArboristSite MVP
The 460 oil pump is the cure all, I have three 361's all with 460 pumps, 28" bar on one of them, works super
Welder56
Addicted to ArboristSite
Dan nice slideshow!! Big woodpile as well LOL! What beach were you at??
My 044 has a 20" bar and seems to be perfect for what I've used it for.
My 044 has a 20" bar and seems to be perfect for what I've used it for.
Have you guys ever seen sparks come off your chain when cutting?
Jimmy in NC
Addicted to ArboristSite
Only when it is trying to cut something it shouldn't!
We have a few species here where it's quite common, especially when the trees had twenty plus years to dry. I've been cutting some Grey Box (Eucalyptus macrocarpa)
lately, it's about 10" in diameter and I'm sharpening the chain about every 15 cuts.
I've had sparks , trapped metal
I've had gravel and sand at the stump and some real dirty logs as well .
Colin , take the kids to Grand Dessert on a sunny day , get there as the tide comes up , it makes for real warm water , lots of sand and not crowded
I've had gravel and sand at the stump and some real dirty logs as well .
Colin , take the kids to Grand Dessert on a sunny day , get there as the tide comes up , it makes for real warm water , lots of sand and not crowded
I've had sparks , trapped metal
I've had gravel and sand at the stump and some real dirty logs as well .
Colin , take the kids to Grand Dessert on a sunny day , get there as the tide comes up , it makes for real warm water , lots of sand and not crowded
BTW , you can see "Secret" beach from there in the distance LOL
Welder56
Addicted to ArboristSite
Looks like a nice beach Dan! Have it check it out sometime. Went to rainow heaven today with the kids. Was a beautiful morning. Hot enough I didn't mind jumping in LOL
Dry locust will give Ya sparks.
That`s great Bobby, that hospital sounds like it has no hands, left don`t know what the right is doing, both numb!!
