wdchuck
Addicted to ArboristSite
Thanks to you guys for putting so much good information on the site, it made it easy to get into CSMing logs, and gave me the confidence to take the show on the road as it were.
Here's a 1min clip of a demo I did at DADSTOCK, a GTG for stay-at-home-dads, following the milling of the log, was an hour of sharpening how-to's, and saw care for the dad's that asked for that info. It made me realize just how much I've learned from the members on the site, and the difference between shiny cutters and sharp cutters.
Even brought out some of the neighbors and after I was done milling the log into four boards, he brought over his c-saw and I earned few bucks sharpening his chains and giving the saw a lookover, again, all thanks to the members here.
I should have put a V-block to hold the log steadier,but it was working out well, I'll have a better setup for next time.
The vid took about 10min to load for me on my dial-up connection.
http://www.youtube.com/watch?v=P-Gr5LdCJ_o
Here's a 1min clip of a demo I did at DADSTOCK, a GTG for stay-at-home-dads, following the milling of the log, was an hour of sharpening how-to's, and saw care for the dad's that asked for that info. It made me realize just how much I've learned from the members on the site, and the difference between shiny cutters and sharp cutters.
Even brought out some of the neighbors and after I was done milling the log into four boards, he brought over his c-saw and I earned few bucks sharpening his chains and giving the saw a lookover, again, all thanks to the members here.
I should have put a V-block to hold the log steadier,but it was working out well, I'll have a better setup for next time.
The vid took about 10min to load for me on my dial-up connection.
http://www.youtube.com/watch?v=P-Gr5LdCJ_o