The Official, 2nd. Annual Pennsylvania Spring GTG (May 9, 2015)

[showrguy]

What are the rest of us gonna cut? Chuck got that 262 and when he touches that thing to a log, he might just get carried away!

Mehh....Husky-shmusky..

Funny thing happened this morning,
I was telling the logger about my Super Split, so once he got done unloading he asked about the splitter, so I grabbed my masterminded MS 260 ( I did'nt have any rounds cut close to the splitter ),
we walked up to it, I uncovered it, then told em, I grabbed a lil baby saw....I fired up the saw and buzzed through a hunk of birch, shut the saw off..
He was standin there with a big grin on his face, he said, I can tell that things had some work done to it..
I said, yea, it made a trip to Tennessee for surgery, it's a 50cc saw but it has a real bad attitude,,,,he laughed really hard, and said, I can tell by the way it went through that cut..
He really liked the splitter,,,,, never even knew there was such a thing...

 

[Wagnerwerks]

After runner the spencer paving version of the 026 last year.... I understand his smile.

 

[Knobby57]

It's really not a big deal to throw the trailer on the truck .
But on anther note I put a few hours on my miller mod saw ms460 today


Sent from my phone when I should be working

 

[Duane(Pa)]

Mehh....Husky-shmusky..

Funny thing happened this morning,
I was telling the logger about my Super Split, so once he got done unloading he asked about the splitter, so I grabbed my masterminded MS 260 ( I did'nt have any rounds cut close to the splitter ),
we walked up to it, I uncovered it, then told em, I grabbed a lil baby saw....I fired up the saw and buzzed through a hunk of birch, shut the saw off..
He was standin there with a big grin on his face, he said, I can tell that things had some work done to it..
I said, yea, it made a trip to Tennessee for surgery, it's a 50cc saw but it has a real bad attitude,,,,he laughed really hard, and said, I can tell by the way it went through that cut..
He really liked the splitter,,,,, never even knew there was such a thing...

Nothing in the world like a Super Split. I have to imagine the quiet strength of the electric model is very kewl!?? Can't wait to see it....

 

[Knobby57]

The birch around me splits super easy . You can probably split it by swinging your **** at it . Not me thoe[emoji20]I blame my dad !!


Sent from my phone when I should be working

 

[showrguy]

The conveyor is in place..
I went and picked up some cookie material this morning...... The oak in the picture is 42" across, other 2 are sycamore..All are about 9' long
Oh, the turkey was shot through one of the garage windows this morning..

 

[psuiewalsh]

So is the idea to cut 16" cookies and split them? Also did you get the bar you needed?

 

[psuiewalsh]

There are a few items that I could bring if someone would want them. First a 088 mount 36" 3/8 /-063 bar I have $140 in it trade value

 

[psuiewalsh]

Next a 10-10 project. Needs carb work but runs and cuts.

 

[psuiewalsh]

Another project. P70 needs piston and seals??

 

[psuiewalsh]

Next a K12 needs carb work but runs with gas through the intake

 

[showrguy]

View attachment 420059 So is the idea to cut 16" cookies and split them? Also did you get the bar you needed?

I did get a small mount 20", 3/8 .050, 72 dl, Husky bar from a friend to tune the saw, I did'nt get a full time bar for it yet...
We will have a couple of different log splitters to demo, should anyone want to see em work..
Some guys wanted to cut firewood length, I got no problem with that,,,,,,,,,,,,but definately not a requirement....

 

[psuiewalsh]

Look out log pile we are comin'

 

[Wagnerwerks]

I did get a small mount 20", 3/8 .050, 72 dl, Husky bar from a friend to tune the saw, I did'nt get a full time bar for it yet...
We will have a couple of different log splitters to demo, should anyone want to see em work..
Some guys wanted to cut firewood length, I got no problem with that,,,,,,,,,,,,but definately not a requirement....

Cookies are easier to spit! Lol

That's a nice pile of wood you have there. Thank you so much for all the work to get this ready.

Tuesday evening we're going to go cut up that pine in McAllisterville if anyone want to come down/up/over for it. It's not going to be epic or anything, but I figure I can test a few saws. If we run out there, I have some oak logs here to testify a few more saws on. We can saw till dark if need be...

 

[Wagnerwerks]

One more almost ready....

 

[psuiewalsh]

You getting the top cover pimped out too?

 

[Wagnerwerks]

I forgot to give it to him when I handed stuff off so I sanded it up and cleared it for now. Maybe later. I did get the filter cover done so it looks a little goofy

You getting the top cover pimped out too?

 

[Stihl 041S]

Got my 044,064,084 for the GTG
I just sent the 090 last year.
Looking forward to meeting folks.

 

[showrguy]

Got my 044,064,084 for the GTG
I just sent the 090 last year.
Looking forward to meeting folks.

The last line of what you posted say's it all....
I dunno if I'll actually get any of my saws out at all.............

 

[Stihl 041S]

The last line of what you posted say's it all....
I dunno if I'll actually get any of my saws out at all.............

Yeah. It could be a great GTG with no saws.....
Did I just say that??