The we need to help Stump rebuild a shop, replace tools, replace saws thread.

[Jon1212]

Jon that'd be fantastic. Wait 'til I getcha those other pics though. We can run up to Crescent City and get Randy to sign 'em. Better bring the JB Rye.....

And two twelvers of PBR, one for us, and one for Randy........LOL!!!!

 

[Andyshine77]

Well guys I've been off the forum for the past week or so. Anyway sorry to hear about your misfortune Stump.

I have an aftermarket 372 top I'd like to donate. Brad gave it to me to play with a little while back. I ported it and did some experimenting just to see how it would effect the power band. No it's not a pretty cylinder it never was, but it will run right with most ported 372, believe me when I say it runs pretty darn well. I also ran this P&C for a few months and it didn't miss a beat. The ring you see on the top of the piston was there from the factory, so no it wasn't hitting the combustion chamber. You can run the cylinder with or without a gasket, but it will run better without.

Here is the top end running on my 372, it's the first saw in the video, it has the scrench mounted on the handle, the other saw is Brads ported 372.

<iframe width="560" height="315" src="http://www.youtube.com/embed/OAZr241B1Ms" frameborder="0" allowfullscreen></iframe>

 

[Work Saw Collector]

Thanks man I'll add it to the list in my signature of this Jan 31 Raffle.

 

[rms61moparman]

Thanks man I'll add it to the list in my signature of this Jan 31 Raffle.

How do you get tickets???

I got to have that P/C!!!


Mike

 

[paccity]

thats the stamper salute.

 

[Eccentric]

thats the stamper salute.

Yep. But thankfuly Randy's still with us, and his arm is still attached.

 

[WetGunPowder]

Here's a few pics of the new stumpshack.
<a href="http://s772.photobucket.com/albums/yy4/stump7997/shop/?action=view&amp;current=shop014.jpg" target="_blank"><img src="http://i772.photobucket.com/albums/yy4/stump7997/shop/shop014.jpg" border="0" alt="Photobucket"></a>
My jacks made it out still useable. Gitting it all leveled up.
<a href="http://s772.photobucket.com/albums/yy4/stump7997/shop/?action=view&amp;current=shop015.jpg" target="_blank"><img src="http://i772.photobucket.com/albums/yy4/stump7997/shop/shop015.jpg" border="0" alt="Photobucket"></a>
Here's a shot fer 08f150, He likes that sorta thing.
<a href="http://s772.photobucket.com/albums/yy4/stump7997/shop/?action=view&amp;current=shop016.jpg" target="_blank"><img src="http://i772.photobucket.com/albums/yy4/stump7997/shop/shop016.jpg" border="0" alt="Photobucket"></a>
And a midget door. Just in case.
<a href="http://s772.photobucket.com/albums/yy4/stump7997/shop/?action=view&amp;current=shop018.jpg" target="_blank"><img src="http://i772.photobucket.com/albums/yy4/stump7997/shop/shop018.jpg" border="0" alt="Photobucket"></a>
<a href="http://s772.photobucket.com/albums/yy4/stump7997/shop/?action=view&amp;current=shop019.jpg" target="_blank"><img src="http://i772.photobucket.com/albums/yy4/stump7997/shop/shop019.jpg" border="0" alt="Photobucket"></a>

Thanks for all of the support.

Hey Stump-How bout a pic of the BACK of that Gravely T-shirt!:msp_thumbup:

 

[Work Saw Collector]

How do you get tickets???

I got to have that P/C!!!


Mike

PayPal one of the emails in my signature 10.00 increments.

I just got an update from Stump I see you are already in.

 

[Smittysrepair]

Stumpy,

I sent out the air impacts in the mail to you today. I had to take the new 1/2'' gun out of its box to get it to fit in the flat rate box. The Matco 3/8'' butterfly impact is only lightly used and the IR212 3/8'' impact has been used just a couple times sense I rebuilt it. I did notice that the trigger was stuck on the IR gun when I got it out of my box but after playing with the trigger I got it to free up. I wanted to get it shipped out today or I would have torn it down and cleaned it. If it gives you any problems let me know and I will have a new one in the mail ASAP. I actually rebuild mechanics air tools as a side job so if you or anyone else have any that need fixed send them on. For the next 90 days I will fix any that are sent to me for the cost of parts and shipping. I even have a good and very cheap source for OEM parts for most major brands of air tools. Merry Christmas everyone.
View attachment 211799View attachment 211800

 

[Andyshine77]

How do you get tickets???

I got to have that P/C!!!


Mike

Hahaha it's not quite like yours, but it still runs well.:smile2:

 

[VA-Sawyer]

Found this thread yesterday and finished reading all posts tonight. Very sorry to hear about Stumps fire, and very inpressed with the way so many have helped. I have a WoodMizer LT40HD and would consider dragging it out to MO to saw lumber for the rebuild if it will help.
Rick

 

[RandyMac]

Thanks for the help Aaron. I'm hoping the print shop I use can make one up for me the same size as one of those NFL "Fathead" posters..........Randy, will you sign it for me.......please!!!:biggrin:

this one from last year or the one Ric took with Annie's shoes in it?

 

[R DeLawter]

I need air tool repair!!

Stumpy,

I sent out the air impacts in the mail to you today. I had to take the new 1/2'' gun out of its box to get it to fit in the flat rate box. The Matco 3/8'' butterfly impact is only lightly used and the IR212 3/8'' impact has been used just a couple times sense I rebuilt it. I did notice that the trigger was stuck on the IR gun when I got it out of my box but after playing with the trigger I got it to free up. I wanted to get it shipped out today or I would have torn it down and cleaned it. If it gives you any problems let me know and I will have a new one in the mail ASAP. I actually rebuild mechanics air tools as a side job so if you or anyone else have any that need fixed send them on. For the next 90 days I will fix any that are sent to me for the cost of parts and shipping. I even have a good and very cheap source for OEM parts for most major brands of air tools. Merry Christmas everyone.
View attachment 211799View attachment 211800

Smittysrepair,


I have a snap-on 3/8 air ratchet I would like to send to you to check over. Will pay what it takes to get it going.
Just give me a shipping address.

 

[jra1100]

Stumpy,

I sent out the air impacts in the mail to you today. I had to take the new 1/2'' gun out of its box to get it to fit in the flat rate box. The Matco 3/8'' butterfly impact is only lightly used and the IR212 3/8'' impact has been used just a couple times sense I rebuilt it. I did notice that the trigger was stuck on the IR gun when I got it out of my box but after playing with the trigger I got it to free up. I wanted to get it shipped out today or I would have torn it down and cleaned it. If it gives you any problems let me know and I will have a new one in the mail ASAP. I actually rebuild mechanics air tools as a side job so if you or anyone else have any that need fixed send them on. For the next 90 days I will fix any that are sent to me for the cost of parts and shipping. I even have a good and very cheap source for OEM parts for most major brands of air tools. Merry Christmas everyone.
View attachment 211799View attachment 211800

Ahh crap, I can't rep ya for this as I am out of bullets, and I gotta wait on ya anyway, but this is beyond the pale as far as good Samaritan goes, and there are MANY others who are in your league on this site. Somebody get him for me until I reload. JR

 

[VA-Sawyer]

I got him for ya.

 

[Eccentric]

this one from last year or the one Ric took with Annie's shoes in it?

My guess is that it's the 2010 pic Ric took with you wearing the hat and holding Annie's shoes...:msp_thumbup:

 

[Eccentric]

Here's one of the RandyMac pics I mentioned. A classic.

 

[RandyMac]

you are going to give me some sort of complex

 

[Teddy.Scout]

you are going to give me some sort of complex

WOH, WOH!
What saw is that Randy?

 

[RandyMac]

050 Teddy lad.