What brand is your main firewood saw?

[Icehouse]

I have that same problem with my pair of 361s. Sometimes I grab the 036 instead.

I have a Stihl 034 super I use sometimes cause I just like the looks of it

 

[koomie]

Stihl 066 is the first saw that's in the back of the truck. Back up saw is another 066, then a 440

 

[steve easy]

Stihl ,066 my old one .Have a new one, just prefer the old one. Sometimes a 038 for limbing/spare saw.

 

[Jrapp]

I usually will pull my jred 2240. But lately since it's new to me I've been usin the 028s.

 

[7sleeper]

Dolmar 420 & Oleo Mac 962.

7

 

[scallywag]

 

[XSKIER]

I have a number of other brands but when I need reliable saws to get the job done away from home I usually end up with Stihls.

Well put. Especially considering the fact that you seem to have access to saws that we could not even imagine.

 

[longbowch]

I mostly use a stihl 440 and if I want a smaller saw for lim bing I put a 20 inch bar on it.


Sent via mental telepathy

 

[Clyde S. Dale]

Stihls right now - I limb with an MS880 and for the big stuff I use an MS192T. Both stock of course.

 

[VINIFIREWOOD]

I don't always cut wood
But when I do it's with a Dolmar
or a Stihl
but I'd like to try a Husky or a Jonsered or an Echo or Efco or or or

 

[Tree Feller]

Just a couple of dolly's. A 510 and a 6400! Good enough for me!

 

[Marshy]

Im actually suprised how few use Jonsered, thought there would be more "love" for the reds.

Anyways, I only have two saws and the 365 I have was practically a basket case when I got it and just got it back together. I havent had much of an opportunity you use it but I will the next few week. The 365 is so rough around the edges and hasnt proved to be reliable yet so it is a backup to my J'red 2159C. Ive owned the J'red going on 3 years now and have only cut 12-15 cord with it. Its a good mid size saw IMO and has been able to drop anything I put it up against with my 18" bar. Might not be the fastest but it has no problem burrying the tip.

 

[zogger]

I don't really have a main firewood saw singular as I cut one inch to four feet diameter. I use a variety of sizes and they are all "main" saws.

 

[stmonnat]

Husqvarna 390 and 346

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[RedneckChainsawRepair]

It would be either Poulan or Echo now days. Have both series from 40cc to 83cc - 39cc to 80cc most of them will cut with or out cut their top 2 competition in their cc range.

 

[ILikesEmGreen]

I'll have to go along with JJ on this one. Poulan's in my truck too. The 3400-4000 and 4200-5200 series are very solid, great running saws. Nothing knocking the "Orangemen" though. Def alot of respectable saws out there. But... Well...ILikesEmGreen.

Sent from my C811 4G using Tapatalk

 

[bonkelaar]

Echo CS 4500 from 1987

 

[sunfish]

If I hadn't of stumble across a 346xp in 2001, I'd likely be running Stihl saws by now.

Was nothing but Poulan before that. 245A & 3400

 

[Fishnuts2]

I've cut most of my firewood the last 10 years with my Husqvarna Rancher 50. I've gained a few more saws since Fall. (CAD). So now I have to make choices all over again.

 

[mike047]

Stihl 026