What's on your bench? October 9th 2013

[Mastermind]

Looks like the site is back on track.......some of you guys probably caught up on some work since you couldn't waste all your time being a post ho......

It's 660 week for me........

 

[farrell]

Fun fun!

This is what I got........



Broke case on one and bad bearings in the other



And this needs a new case gasket

 

[John R]

What's on your bench? October 9th 2013

Junk, junk, and more junk. :hmm3grin2orange::hmm3grin2orange:

 

[thomas41]

damhellspit

my 066 spun the bearing in the case on the clutch side. WHAT A PITA!!! Weighing options how to fix it. I know its too hot for jb weld and such like.

 

[Mastermind]

Junk, junk, and more junk. :hmm3grin2orange::hmm3grin2orange:

You saw the Huskys sitting there huh? :cool2:

my 066 spun the bearing in the case on the clutch side. WHAT A PITA!!! Weighing options how to fix it. I know its too hot for jb weld and such like.

Loctite 680

 

[kc4sfe]

Getting ready to kit a carb on a 010AV after changing out the sprocket and trying to get an old sl-4 to tune and run again.

Where do these old saws come from? They just keep showing up in the garage......

 

[exSW]

Saws are runnin' great,everything else has turnt to #### though...

 

[gr8mac]

Got a Johnny 801 on the bench right now. Trying to track down fuel delivery issues :bang:

 

[duramax99]

got a few saws ready for the bench... Shops finally starting to get organized.

 

[Scoutillac]

These are on the floor in front of the bench.

 

[eiklj]

I had a bench somewhere, I just can't find it.
Anyway, I've got a Husky 266XP, Jred 2071 turbo, Stihl 08 and TS 350, and 3 cutoff saws. A Partner K700 and 2 Husqvarna K760's.
Thinkin' 'bout having the 2071 ported. It's got a Meteor BB top end (52mm). I've got the original P&C if someone wants it, 50 mm. The saw was run over by a tractor and I'm trying to breathe new life into it.
Anyway, back to work.

 

[blsnelling]

I've got a NOS clutch setting on the bench for my Mall 6. I did a complete restoration on it 2-3 years ago. I finished it, with the exception of needing a clutch. I was mighty happy to find a NOS one on EBay last week. I'm hoping to get it installed and take it to the Poulan Lover's GTG this weekend.

 

[kz1000]

I've got a NOS clutch setting on the bench for my Mall 6. I did a complete restoration on it 2-3 years ago. I finished it, with the exception of needing a clutch. I was mighty happy to find a NOS one on EBay last week. I'm hoping to get it installed and take it to the Poulan Lover's GTG this weekend.

I couldn't top that if I had to.:msp_unsure::msp_unsure:

 

[blsnelling]

I couldn't top that if I had to.:msp_unsure::msp_unsure:

That's probably the cream of my crop....one of my very favorites for sure.

This is what I started with!

Parts curing in the kitchen

 

[Stihl 041S]

I've got a NOS clutch setting on the bench for my Mall 6. I did a complete restoration on it 2-3 years ago. I finished it, with the exception of needing a clutch. I was mighty happy to find a NOS one on EBay last week. I'm hoping to get it installed and take it to the Poulan Lover's GTG this weekend.

Is that the one from New Jersey?

 

[KenJax Tree]

Some oil

Sent from my AutoTune carb

 

[firefighterwolf]

1100cd


Husqvarna 1100CD (with some 2100 items). Finally have all the parts to start pulling it together. Only have about 30 minutes every other day to work on her. Put new seals in it today.

 

[Yukon Stihl]

Junk, junk, and more junk. :hmm3grin2orange::hmm3grin2orange:

Same here,same stuff as last year:msp_rolleyes:

 

[AKDoug]

I know, I know, pics or it ain't true... but I've got a nice complete Stihl 07S on my bench tonight, but I have to leave for three days I looked at it long enough to see it has a bad crank bearing. Not sure if I'm going to do a full restore or a preservation. The only thing missing is a couple "spokes" on the recoil.

Knocked out a quick ignition on a MS260, finding a broken fuel line too. Oil pump in an MS250. Carburetor in a Husky 340. Tune up on an 028. Keeping the customers happy.

 

[Mr. Bow Saw]

Titan 60. I have been working on.