Kgw51gmc
94 c3500 hd boat anchor
Wire that energizes electric clutch on hydraulic pump broke flush with the case. Pump is laying loose,I haven't and don't want to remove hydraulic lines if unnecessary. Nut on center of pulley....but no way to hold still, aside from re mounting and letting the belt hold it. If was on the bench no clue.
I need apart to mend that wire. Those four little bolts that hold electrical components loosened easy but the pulley is in way of pulling off. Is there a trick or a hole underneath I'm not seeing to poke something in to hold it?
I need apart to mend that wire. Those four little bolts that hold electrical components loosened easy but the pulley is in way of pulling off. Is there a trick or a hole underneath I'm not seeing to poke something in to hold it?