Wood Haulers - show us your woods rig.

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
taplinhill

taplinhill

Addicted to ArboristSite
. AS Supporting Member.
Joined
Mar 13, 2007
Messages
2,588
Location
Vermont
Well, here are mine...................

Here is the old '51 Chevrolet 1 ton. It began it's life as a farm truck hauling hay, cattle, sawdust, and yes, firewood. It is now awaiting a rebuild.

51Chevy.jpg


Next is the 1980 Chevrolet k20. It too began it's life as a farm truck, mostly hauling hay wagons and forage wagons. It came to me from my brother-in-law and served me well as a woods truck. I would like to restore it someday (and have bee collecting the parts to do so for a few years).

80ChevyK20.jpg


Next up has been my faithful truck for years. It is a 1988 Chevrolet K1500. Shown here with the last load of wood it ever hauled. (this June) It has almost 300K on it, and has had 2 body jobs. She won't pass inspection anymore. I need something for next year as the following two trucks finished up the last few loads this year, but just don't hold enough.

88ChevyK1500.jpg


1987 GMC K15. Just too pretty to haul wood with. (But it has hauled some!)

GMCPROP.jpg


1990 Chevrolet K1500. This is my everyday driver. The step-side is nice because it won't rust over the wheel wells, but you can't haul crap in it. Thus, I need something different for next year.

90ChevyZ71-1.jpg


My yard trucks. 1989 Chevy K1500, 1985 Ford F150.

89ChevyK1500_8.jpg

85FordF150_2.jpg
 

Wet1

Addicted to ArboristSite
Joined
Jun 30, 2008
Messages
1,028
Location
New England
My truck (4x4 CTD) with a full load of green oak:

Loadofwood.jpg




My 7x14' 14k dump trailer, holds 22 yards (a sh!tload of wood!):

DumpTrailer.jpg




Not shown is my 6.5x12' landscaping trailer and portable Superwinch setup for moving the tough stuff. :)
 
Four Paws

Four Paws

Addicted to ArboristSite
Joined
Jun 8, 2006
Messages
2,867
Location
ID
Nice trucks (and tractors) guys...thanks for contributing.

The previous owner must have known about needing good batteries as the truck has a set of Optima 1000amp Red-Tops in it. Battery heaters, block heater, and electric water pump to circulate coolant through the engine while it is plugged in.

The truck has the 700R4 automatic, but I actually like that transmission. Super low (for an automatic) first gear, and an overdrive. They can be built VERY strong.

I will take the tranny and xfr case from the Suburban as well...a guy never can have enough spare parts. Anyone ever pump one of those 6.2s up? I know Banks makes a turbo for it, and it is a mechanical pump so they are easy to turn up. Let me know if you have any tips and tricks, or direct me to a good website/forum.

Thanks guys!
 
Brimmstone

Brimmstone

ArboristSite Operative
Joined
May 17, 2008
Messages
280
Location
texas
I'll agree with you on the 700r4. Last one I built is still living behind a 1000+ hp big block in a Camaro. I did spend almost a 1100 bucks in parts but it has lived with that monster for three years now.
 
Vangellis

Vangellis

ArboristSite Guru
Joined
Jul 7, 2007
Messages
978
Location
Factoryville, PA.
:clap: nice vids..
if ya put some chains on those turf tires and you will notice a BIG differance....

Hi dsm.

It does well on the traction end. It has a diff lock and that comes in handy for the hills in the woods.

I have chains for it, but save them for this....


<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/HdHEIDDvBo4&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/HdHEIDDvBo4&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>



Nice trucks guys!



Kevin
 
alpinecrick

alpinecrick

ArboristSite Operative
Joined
Aug 16, 2008
Messages
372
Location
Western Slope of Colorado
the 6.2 Diesels were hit and miss, some guys like them, some hated them. My dad had one in an old Suburban, ran fine until one day it just threw a rod unexpectedly.

Aside from that looks like a sweet rig! I would snatch it up if the price is right.


That's been my observation, some of those motors continue to live on, some of them died an early death. May be they require more meticulous fluid changes and injector maintainance..........


Casey
 
Modifiedmark
Joined
Dec 2, 2007
Messages
19,290
Location
NW Indiana
Hey Modified Mark..........Nice Dodge.....that thing got a Hemi?????
nice job on trailer, kind of looks like ours..;)



Yeah its got a Hemi LOL. I was always a Ford man but couldnt pass up the deal on this one. I'm happy with it.

I have had a few diesel trucks but no more for me, as I only drive a truck when I need a truck.

The trailer, I built about 10 years ago.
 
chainsaw1

chainsaw1

ArboristSite Operative
Joined
Nov 1, 2006
Messages
172
Location
Mich.
I like that, not even squating 1 bit. Josh, could you provide us a price for your new truck?


Here is my $100 trailer and i built a hoist for picking up the big ones and putting my 22 ton spliter in the back of it. (have a 3000lb electric winch for the hoist and a electric jack on the front also.

captiankirk28
 
Last edited:
woodyman

woodyman

Addicted to ArboristSite
Joined
Mar 30, 2008
Messages
3,032
Location
Santiago township,Minnesnowda
I just hual 4 to 5 cords from the woods to around the house and around where the pics were shoot every year on my land with this 4x8 trailer.I have about 15 cords split and stacked now and have to find some room for this winters cutting.When my brother and I cut together(which is within five miles of my place we use his 1997 3/4 ton chev an a 4 place snowmobile trailer.Last pic is what I call a cord,24 foot long 4 foot high and 16 inches wide.Is that what a cord is every place else around the contry?:givebeer: :chainsaw: Oh yeah,I agree with ropensaddle even though I just got myself a Stihl 026(what was I thinking):givebeer:
 
Ole Farmerbuck

Ole Farmerbuck

Addicted to ArboristSite
Joined
Jan 25, 2007
Messages
1,180
Location
western ks
I just got done taking my wood hauler to town to have a lift installed for raising the flatbed. Its a 1974 3/4 ton chevy 4x4. Very clean. Anyone know how much ont of those Tommy Lift systems will lift? The place of business has a few of them off of furniture trucks and is giving me one but have to pay for install. (between 3 and 4 hundred)
 
DieselTech

DieselTech

ArboristSite Member
Joined
Nov 11, 2007
Messages
74
Location
Middle Tennessee
Cutting012.jpg


Cutting013.jpg


Cutting017.jpg


Cutting020.jpg


It's a '56 F-350. Back in February of this year I sold my '02 F-350, 4x4, dually, Powerstroke, and bought this one. It's now the only vehicle I own. I have a top speed of 55 MPH, and my best fuel mileage was 13 MPG cruising down I-40, before I put the taller sides and front on the flatbed. Wouldn't want it any other way. :clap:
 

Latest posts

Top