brncreeper
Addicted to ArboristSite
I’ve got some milling to do this week, so the 3120 is getting put to use. This is the first outing with the 3120 since timberwolf gave it a woods port.
Both cameras went dead after the first pass, but I did manage to get a video of the first pass. For the second pass, I set the mill down to 8 inches and made cut through the center of the log, it went just about as quick as the top pass. Don't know what kind of tree it was, but it seemed plenty hard.
I’m using an 8 pin sprocket and 3/8” chain for the milling.
Both cameras went dead after the first pass, but I did manage to get a video of the first pass. For the second pass, I set the mill down to 8 inches and made cut through the center of the log, it went just about as quick as the top pass. Don't know what kind of tree it was, but it seemed plenty hard.
I’m using an 8 pin sprocket and 3/8” chain for the milling.