Nik's Poulan Thread

Rugged made
Treestuff
Wesspur
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
67 Mustang said:
Y'all go 'head n call. Always glad to hear from ya.
Click to expand...

Y'all, if ya can, refrain from calling him before the GTG as he's only 6 months behind in his preparations for it. LOL! He's got a few different saws to bring to the GTG than what he had last year.
Personally, I'm very gratefull to have been invited to tag along on this one and hope you fellas can have a little patience with my sand-cast models as they are about the only Poulans I have. The newer models seem to be ALL-GRABBED-UP in these parts or too expensive for my blood. Or in some cases, they've been ragged out to the point I could never fix 'em.
If you hang me for being a chainsaw mechanic, you'd be hanging an Innocent man.
Been perusing a good number of pages on this thread this AM and there seems to be a strong following here among a core of Poulan collectors. I like a gang that looks out for each other!
I saw that episode of American Pickers where Mike stepped over the "stinger" and bar of a two-man saw. I ran it back several times and to my consternation it was definately a Poulan helper handle. It and it's attached saw could have easily been the best stuff at the mans' place! RATS! If I remember right, they were in NC too!
Igpoe:cheers:
 
igpoe said:
Y'all, if ya can, refrain from calling him before the GTG as he's only 6 months behind in his preparations for it. LOL! He's got a few different saws to bring to the GTG than what he had last year.
Personally, I'm very gratefull to have been invited to tag along on this one and hope you fellas can have a little patience with my sand-cast models as they are about the only Poulans I have. The newer models seem to be ALL-GRABBED-UP in these parts or too expensive for my blood. Or in some cases, they've been ragged out to the point I could never fix 'em.
If you hang me for being a chainsaw mechanic, you'd be hanging an Innocent man.
Been perusing a good number of pages on this thread this AM and there seems to be a strong following here among a core of Poulan collectors. I like a gang that looks out for each other!
I saw that episode of American Pickers where Mike stepped over the "stinger" and bar of a two-man saw. I ran it back several times and to my consternation it was definately a Poulan helper handle. It and it's attached saw could have easily been the best stuff at the mans' place! RATS! If I remember right, they were in NC too!
Igpoe:cheers:
Click to expand...

LOL, Tell Steve to quit polishing all the screws and bits on them saws, and get them together!:msp_biggrin: Steves stuff is always immaculate! He takes great pride in his saws.

I agree with the Picker guys too. One of the last shows I watched, they were at a place that had bunch of old Ford 8N tractors and parts. From what I could tell, they were mostly the Funk conversion units with the straight six or V8 engines. Not a word was mentioned of them, or desirability of their parts. :dizzy:

Looking forward to seeing your sand cast Poulans in action also. I just have the one, model 47, that I hope will cooperate when GTG time rolls around.

:cheers:
Gregg,
 
igpoe said:
Y'all, if ya can, refrain from calling him before the GTG as he's only 6 months behind in his preparations for it. LOL! He's got a few different saws to bring to the GTG than what he had last year.
Personally, I'm very gratefull to have been invited to tag along on this one and hope you fellas can have a little patience with my sand-cast models as they are about the only Poulans I have. The newer models seem to be ALL-GRABBED-UP in these parts or too expensive for my blood. Or in some cases, they've been ragged out to the point I could never fix 'em.
If you hang me for being a chainsaw mechanic, you'd be hanging an Innocent man.
Been perusing a good number of pages on this thread this AM and there seems to be a strong following here among a core of Poulan collectors. I like a gang that looks out for each other!
I saw that episode of American Pickers where Mike stepped over the "stinger" and bar of a two-man saw. I ran it back several times and to my consternation it was definately a Poulan helper handle. It and it's attached saw could have easily been the best stuff at the mans' place! RATS! If I remember right, they were in NC too!
Igpoe:cheers:
Click to expand...

looking forward to meeting you. Any friend of Steve's is a friend of mine.
 
igpoe said:
Personally, I'm very gratefull to have been invited to tag along on this one and hope you fellas can have a little patience with my sand-cast models as they are about the only Poulans I have.
Click to expand...

I'll bring some company for your sand cast Poulans.

901528106_XoseN-M.jpg


901527691_NzAwh-M.jpg
 
barneyrb said:
Got a question for you Poulan Guru's. The sprocket that fits the 361 and the cousins does it fit anything else? I came across about a dozen of them.
Thanks...
Click to expand...

Yeah they fit the 360, 361, 400, 401, 450 and 451.

I just picked up a few extra a while back as well. I guess I need to find a 360, 400, 401, 450 and 451 to put them on. :rock::D
 
talked it over with the fiancee and shes cool with it she might even come. Off the top of my head id take:
245A
a couple S25s
2 3.7s
4000 and 395
3400
Wizzard
335s if they are done by then
and a few others
Look forward to meeting you guys!
 

Similar threads

F
Looking for input on Poulan Pro 455
Replies
1
Views
579
Lightning Performance
Lightning Performance
altatim
Want to Sell Yard Sale (Stihl 031AV, 044, Poulan, Husqvarna 575 Parts)
Replies
3
Views
834
altatim
altatim
B
Poulan 2700
Replies
16
Views
1K
Besawin
B
B
Craps-poulan tuning
2
Replies
20
Views
2K
benz66
B
Coralillo Lo Pro
045 and 056 Super tuning
Replies
2
Views
486
Coralillo Lo Pro
Coralillo Lo Pro

Latest posts

Back
Top