sawnami
Addicted to ArboristSite
Was going through a box of large bore Homelite pistons and found this. Any ideas what it fits? 2.250" dia.
Sent from my SM-N910V using Tapatalk
Sent from my SM-N910V using Tapatalk
Homelite Chainsaws
- Thread starter briantutt
- Start date
Help Support Arborist Forum:
- Joined
- Jan 11, 2014
- Messages
- 3,379
I believe that is for some sort of compressor. There was one similar for sale on EBay a few years back and that what it was for.Was going through a box of large bore Homelite pistons and found this. Any ideas what it fits? 2.250" dia.
Sent from my SM-N910V using Tapatalk
brandonstc6
Addicted to ArboristSite
Was going through a box of large bore Homelite pistons and found this. Any ideas what it fits? 2.250" dia.
Sent from my SM-N910V using Tapatalk
Homelite did make a outboard motor. The bearcat 55
Sent from my iPhone using Tapatalk
sawnami
Addicted to ArboristSite
Hmmmm, I forgot about that!
Sent from my SM-T900 using Tapatalk
Sent from my SM-T900 using Tapatalk
Find any other good ones?
sawnami
Addicted to ArboristSite
Different animals if I'm not mistaken, with the XL12 using the larger style.
The Super EZ I got recently has the really tiny tail bar but the later XL-1's I have came with D096 mount bars. XL-1's have the same bar pad and stud setup as the EZ.
Both type oil through the chain tension adjust holes.
I don't have an XL-12.
Both type oil through the chain tension adjust holes.
I don't have an XL-12.
I have some early and late xl-12's. Some have 5/16" studs and others 3/8". The earlier XL-1's, Super Mini's and 76/130's in my mix all have the narrow profile bars (kind of like a 095). The later all have the large mount bars and utilize stud spacers. I want to think if the large mount bars were in surplus at the factory, they mounted them up regardless of stud size. You see the same thing on 3400-4000 series Poulans around here wearing the large mount UXL and spacers.
XL-12, SXL and so on take the 196/096 pattern. The XL-1xx, SEZ, Super Mini and so on take the 095 pattern
I think Terry industries put whatever worked on the saws up in Canada.
That little tiny bar on the Super EZ (from the US) Which looks to be original on the saw is too small. The drive links enter the bar quite a piece past the tail.
Looking for a little dry weather to try that out and the XL-1 with the LP chain on it as well. I might have been a little critical of these saws all the time not thinking how darn hard that dry white ash I have is. Make's the little guys shake badly.
That little tiny bar on the Super EZ (from the US) Which looks to be original on the saw is too small. The drive links enter the bar quite a piece past the tail.
Looking for a little dry weather to try that out and the XL-1 with the LP chain on it as well. I might have been a little critical of these saws all the time not thinking how darn hard that dry white ash I have is. Make's the little guys shake badly.
A couple of these. For a 2000.
Sent from my SM-N910V using Tapatalk
IPL shows these have the rulon plug to retain the pin. Are they there?
Chris B.
sawnami
Addicted to ArboristSite
XL-925 at Garden City, Ks.
homelite xl 925 chainsaw $125
http://kansascity.craigslist.org/grd/6094332594.html
via cPro for Craigslist
iOS: http://tinyurl.com/cPro-iDevice
Android: http://tinyurl.com/CL-Android
homelite xl 925 chainsaw $125
http://kansascity.craigslist.org/grd/6094332594.html
via cPro for Craigslist
iOS: http://tinyurl.com/cPro-iDevice
Android: http://tinyurl.com/CL-Android
nice to cut some green after old dry ****
I believe they did make one. A member here ( onlyhomelites) has one. It might be a Canadian thing only. Here's some pics.
https://www.flickr.com/photos/113175784@N04/sets/72157639297389033
