thomas1
sodium pentothal
- Joined
- May 2, 2010
- Messages
- 3,651
- Reaction score
- 1,092
Sorry if this has been asked 100 times before but, the search is still broken.
Are p50,p51,p52 parts interchangeable?
Are p50,p51,p52 parts interchangeable?
Sorry if this has been asked 100 times before but, the search is still broken.
Are p50,p51,p52 parts interchangeable?
For the most part they are. Early P50's used a mesh type air filter so the rubber carb box and top cover and top handle are different. The P52 uses a different coil and flywheel also.
What do you have in mind?
Question for the Pioneer Experts out there.
I am looking for an after market piston for my Nu17 Saw.
I saw that someone had found a similar piston and machined it to suite but for the life of me i cannot find it again.
Any info would be great.
Thanks in advance
Aquired a P21 as a parts saw, Supposedly seized [starter cord all frayed &locked up]Rest looked OK [carb kit & new fuel line & filter] Starts & runs really good,Problem, on idle I get a ringing/jingle coming from the clutch/ sprocket Have replaced sprocket/clutch drum & bearing , slightly better but still tinging away, all thoughts/idea`s welcomed [Runs & cuts good & idles fine] Thanks.
this has come up on local auction site,
Looks a good saw One owner and never misstreated
View attachment 187546 View attachment 187547
Al, our postal strike is supposedly over, your parts will be going out shortly.
I agree with Ed, they all seem to do that.
this has come up on local auction site,
Looks a good saw One owner and never misstreated
View attachment 187546 View attachment 187547
I'd be grabbing that one up if I were you David. :msp_smile:
Thanks Ed & Chris Every thing seemed to be good, but it sounds like a blacksmiths shop on idle. We should get them altogether & see if we can tune them & form a handbell ringing group Al.
this has come up on local auction site,
Looks a good saw One owner and never misstreated
View attachment 187546 View attachment 187547
this has come up on local auction site,
Looks a good saw One owner and never misstreated
View attachment 187546 View attachment 187547
Enter your email address to join: