Swap meet...

[bowtechmadman]

I'm needing one for my Husqvarna 266SE. Everything else is done, and ready to go. I thought I had a bar, but it turns out the bar I have is a K095 mount.

Try a search for Ebel's hardware in Falmouth MI. They ship anywhere in the world. They have 20" Husky labeled 3/8th, .050 bars (old stock from GB, replaceable sprocket tip) they are selling w/ chain (your choice full chisel or semi) for 28 bucks. Pretty tough to beat that kind of deal.

 

[nstueve]

I have a 034 that had a shot top end and missing a bunch... Putting it back together with a 036 top end... Here's what i'm looking for!
1.) air filter and cover
2.) cylinder cover (pro with decomp prefered!)
3.) fuel line
4.) muffler
5.) cover washer and clutch pack
6.) oil cap

Also wanting a Stihl 076 muffler cover still!

Got stihl bits and pieces... 009-012, 024/026, 029/390, random bars and chains... $$$...

Bump... Shortened the list for the parts I have. Might have some others to knock off but if you have any of them let me know!

ALSO!!! looking for the guy in southeast IOWA that I was going to trade my SXLAO to!!! Please PM me!!!! I'll be in your area next week!

 

[redheadwoodshed]

I have a wiz 55 homelite and a poulan 361 I'd like to swap for something by McCulloch(the bigger the better).The wiz sports a bow and is complete as far as I can tell except the cover for the cylinder(the one with the big hump).The 361 looks complete.Both saws are froze up and have been sitting for many years but would make good parts saws or maybe even a project.Pictures are beyond my capabilities, if you aren't familier with these saws they are on Acres.Both are 60s vintage.PM me if interested, and I said Mc. but will consider others.Thanks.

 

[Eccentric]

I think I know the answer but any chance somebody might have a sprocket shaft for a Homelite 1130G? I was playing with a 60" bar the other day and it started pouring gear oil from the sprocket area. Looks like one of the key ways sheared and I'm guessing caused the oil seal to leak. The seal looks fine but I might replace it to if I can find one. Sorry, couldn't find part numbers for either.


Sent from my SCH-I500 using Tapatalk 2

Ouch!

I've seen NOS shafts for those saws on feebay recently. You may also be able to get your shaft welded and machined.

 

[Chris J.]

I have a wiz 55 homelite and a poulan 361 I'd like to swap for something by McCulloch(the bigger the better).The wiz sports a bow and is complete as far as I can tell except the cover for the cylinder(the one with the big hump).The 361 looks complete.Both saws are froze up and have been sitting for many years but would make good parts saws or maybe even a project.Pictures are beyond my capabilities, if you aren't familier with these saws they are on Acres.Both are 60s vintage.PM me if interested, and I said Mc. but will consider others.Thanks.

You not able to post photos here on AS, or you're not able to provide photos at all :msp_confused:?

 

[blsnelling]

Anyone have a 365/372 case, or at least the PTO side?

 

[ptjeep]

Ouch!

I've seen NOS shafts for those saws on feebay recently. You may also be able to get your shaft welded and machined.

I figured I would hunt for a new for a while and if no luck, head for the machine shop.

 

[tlandrum]

Anyone have a 365/372 case, or at least the PTO side?

i might be able to come up with one. what exactly is the malfunction on yours?

 

[sefh3]

i might be able to come up with one. what exactly is the malfunction on yours?

http://www.arboristsite.com/chainsaw/200601.htm

I think this is why.

 

[homelite028]

parts and whole saws

I have a bunch of parts and whole saws. I have bunch of 041 stihl parts whole motors other parts. 10-10 mcculloch parts and 610 mc parts some 028 stihl parts i have a promac 55 good motor few other parts .....I still have the pioneer 1200a runs great 18 inch bar and the dynamark 36cc chainsaw bran fresh good spark and compression
I am looking for xl-700 or bigger homelite dont have to be running.

 

[Warped5]

These little dudes are starting to follow me home ..

Has seen very little use. Got it and a large bag of shop rags for $10.

Looking for the carb cover (black), gas cap and a 12" B&C ... I have stuff to trade or some ca$h. Thanks!

 

[Arrowhead]

Ted, I most likely have a bar for that.

 

[homelite028]

is that a poulan 25

 

[homelite028]

041 stihl parts homelite ez and few other parts

I have a homelite 330 saw head homelite ez. homelite xl-12 parts. 041 whole motors other parts for the 041. rear handle for 028 stihl few other parts promac 55 mcculloch parts and 10-10 .. poulan 25 parts

I am looking for xl-700 or xl-800 or bigger xl saw dont have to be running

 

[Eccentric]

is that a poulan 25

It's a Poulan Micro series saw.

 

[Warped5]

Ted, I most likely have a bar for that.

Thanks Ed .. PM scent.

is that a poulan 25

Yep! I saw your earlier post ... PM scent to you too ... :hmm3grin2orange:

 

[MS460WOODCHUCK]

Has seen very little use. Got it and a large bag of shop rags for $10.

Looking for the carb cover (black), gas cap and a 12" B&C ... I have stuff to trade or some ca$h. Thanks!

With that type of fuel cap and rubber on the handle bar it would be a later version of the 2000 since it says 2.0.

 

[MS460WOODCHUCK]

Looking for a good 24'' bar for a poulan 4000, I have a little to trade and paypal. PM me if you can help me out.

 

[Modifiedmark]

Thanks Ed .. PM scent.



Yep! I saw your earlier post ... PM scent to you too ... :hmm3grin2orange:

Ted, I more then likely have the cover you need. I'll look here in a bit.

 

[jnl502]

Has seen very little use. Got it and a large bag of shop rags for $10.

Looking for the carb cover (black), gas cap and a 12" B&C ... I have stuff to trade or some ca$h. Thanks!

I have one on the shelf if it has a cover yours for shipping
jnl
oops! should have kept reading.
jnl